AIC Tenders & Procurement
TENDER DOCUMENT
Supply, Installation and Commissioning of Equipment, Tools and Materials for the Prototyping Lab, Fabrication Lab, EV & BMS Lab and Allied AIC Labs
Atal Incubation Centre, supported by NITI Aayog – Atal Innovation Mission; hosted at G. Narayanamma Institute of Technology and Science (for Women)
8-1-297/2/1, Shaikpet Main Road Tolichowki, Ambedkar Nagar, Hyderabad, Telangana, India, 500008
1. Tender Notice
Sealed/online tenders are invited from reputed and experienced suppliers, manufacturers, or authorized distributors for the supply, installation, commissioning and training of equipment, tools, machines and materials required to set up three hardware innovation laboratories at AIC-GNITS Foundation, hosted at G. Narayanamma Institute of Technology and Science (for Women), Hyderabad:
Lab 1: EV and BMS Lab - for learning and exploring electric vehicles and battery management systems, technical discussions and faculty development programmes.
Lab 2: Proto Lab (Prototyping Lab) - for rapid prototyping across electronics, IoT, robotics, drones, health-tech, energy-tech and 3D design and printing.
Lab 3: Fabrication Lab - for building first product versions and manufacturing pilot batches of 50 to 100 units.
Packages 8 and 9 cover the AR/VR, Future Technology, AI/ML and Cybersecurity labs from the AIC equipment plan, which are housed in separate rooms. The detailed list of items and minimum specifications is enclosed with this document. The tender is divided into nine packages so that specialist suppliers can participate. Bidders may quote for one or more packages but must quote for all items within each package they bid for.
2. Key Dates
| Event | Date and Time |
|---|---|
| Tender issue date | 06-11-2026 |
| Last date and time for submission of bids | 15-11-2026, 5:00 PM |
| Purchase orders to be placed by | 25-11-2026 |
3. Packages and Delivery Schedule
| Package | Description | Lab | Delivery from PO |
|---|---|---|---|
| Package 1 | Electronics Test & Measurement, Rework and Development Boards | Proto Lab (Lab 2) | 2 weeks |
| Package 2 | 3D Design and Printing | Proto Lab (Lab 2) | 2 weeks |
| Package 3 | Drone, Robotics, Health-Tech and Agri-Tech | Proto Lab (Lab 2) | 2 weeks |
| Package 4 | Fabrication Lab and Pilot-Batch Production | Fabrication Lab (Lab 3) | 2 weeks |
| Package 5 | EV and BMS Lab | EV and BMS Lab (Lab 1) | 2 weeks |
| Package 6 | Furniture, Networking and Safety | All three labs | 2 weeks |
| Package 7 | Starter Consumables and Component Stock | All three labs | 2 weeks |
| Package 8 | AR/VR and Future Technology | AR/VR and Future Tech Labs (AIC) | 2 weeks |
| Package 9 | AI/ML Compute and Cybersecurity | AI/ML and Cybersecurity Labs (AIC) | 2 weeks |
4. Bill of Quantities and Minimum Specifications
Specifications are minimum requirements. Brand and model names, where mentioned, are indicative only; equivalent or better products are acceptable if every listed parameter is met or exceeded and the deviation is declared in the technical compliance sheet. Quantities are based on hands-on training sessions for 20 to 30 students at a time and may be varied by the purchaser at the same rates and terms.
Package 1: Electronics Test & Measurement, Rework and Development Boards
Installation location: Proto Lab (Lab 2)
| S. No. | Item | Minimum Specification | Qty. |
|---|---|---|---|
| A. Test and Measurement Equipment | A. Test and Measurement Equipment | A. Test and Measurement Equipment | A. Test and Measurement Equipment |
| 1 | Digital Storage Oscilloscope | 4 analog channels, ≥100 MHz bandwidth, ≥1 GSa/s per channel, ≥10 Mpts memory, ≥7" display, serial decode (I2C, SPI, UART, CAN), FFT, USB/LAN, four passive probes supplied. | 5 Nos |
| 2 | Mixed-Signal Oscilloscope | 4 analog + 16 digital channels, ≥200 MHz, ≥2 GSa/s, ≥50 Mpts memory, serial trigger and decode, USB/LAN. | 1 No |
| 3 | Programmable Linear DC Bench Power Supply | Multi-channel programmable linear type: 3 outputs (2 x 0-30 V / 0-5 A and 1 x 5 V / 3 A), resolution ≤1 mV / 1 mA, OVP/OCP, USB/LAN, SCPI. | 10 Nos |
| 4 | High-Power Programmable DC Power Supply | 0-60 V, ≥10 A, ≥600 W, remote sense, SCPI, USB/LAN. | 1 No |
| 5 | Benchtop Digital Multimeter | 6½ digit, DC accuracy ≤0.015%, SCPI, USB/LAN, data logging. | 2 Nos |
| 6 | Handheld Digital Multimeter | True-RMS, ≥6000 counts, auto-ranging, AC/DC V and A, capacitance, frequency, temperature, continuity, CAT III 600 V. | 15 Nos |
| 7 | Arbitrary Function Generator | 2 channels, ≥30 MHz sine, arbitrary waveform, modulation, sweep, burst, built-in frequency counter. | 3 Nos |
| 8 | USB Logic Analyser | ≥16 channels, ≥100 MS/s, decoders for I2C, SPI, UART, CAN, 1-Wire; software licence included. | 5 Nos |
| 9 | Benchtop LCR Meter | 100 Hz - 100 kHz, basic accuracy ≤0.1%, 4-terminal Kelvin clips included. | 1 No |
| 10 | Thermal Imaging Camera | ≥256 x 192 IR resolution, radiometric, -20 to 400 °C, thermal sensitivity ≤50 mK. | 1 No |
| 11 | Stereo Trinocular Microscope with Camera | 7x-45x continuous zoom, trinocular, full-HD USB/HDMI camera, LED ring light, boom stand. | 3 Nos |
| 12 | AC/DC Clamp Meter | True-RMS, ≥400 A AC/DC, CAT III 600 V, inrush current, temperature. | 4 Nos |
| 13 | Programmer / Debugger Set | ST-LINK V3, SEGGER J-Link EDU Mini (or equivalent), USBasp/AVR ISP, USB-UART bridges (CP2102/FT232). | 5 sets (1 each) |
| B. Soldering, Rework and Assembly | B. Soldering, Rework and Assembly | B. Soldering, Rework and Assembly | B. Soldering, Rework and Assembly |
| 14 | ESD-Safe Digital Soldering Station | Digital, ≥80 W, 150-450 °C, ±2 °C stability, ESD-safe, stand and three tips; Weller / Hakko class. | 10 Nos |
| 15 | Hot-Air SMD Rework Station | 600-1000 W, 100-500 °C, digital, ESD-safe, assorted nozzle set. | 4 Nos |
| 16 | Vacuum Desoldering Station | ≥90 W, ESD-safe, with tips and filter spares. | 2 Nos |
| 17 | Benchtop Solder Fume Extractor | Activated carbon + HEPA filter, ≥100 m³/h, flexible arm, low noise. | 5 Nos |
| 18 | PCB Preheater | Bottom IR/ceramic preheater, ≥300 x 200 mm, adjustable to 200 °C. | 1 No |
| 19 | Ultrasonic Cleaner | ≥6 L, heated, digital timer. | 1 No |
| 20 | ESD Precision Tool Kit | ESD tweezers, flush cutters, precision screwdriver set, spudgers, wire strippers. | 10 sets |
| 21 | Helping Hands with LED Magnifier | Adjustable arms, ≥3x magnifier, LED light, weighted base. | 10 Nos |
| C. Compute, Microcontroller and IoT Boards | C. Compute, Microcontroller and IoT Boards | C. Compute, Microcontroller and IoT Boards | C. Compute, Microcontroller and IoT Boards |
| 22 | Arduino UNO R4 WiFi (or equivalent) | Original board with USB cable. | 10 Nos |
| 23 | Arduino Mega 2560 Rev3 (or equivalent) | Original board with USB cable. | 5 Nos |
| 24 | ESP32-S3 Development Board | ESP32-S3-DevKitC class, ≥8 MB flash, WiFi + BLE. | 20 Nos |
| 25 | ESP32-CAM Module with Programmer | OV2640 camera, WiFi + BLE, with USB programmer base. | 6 Nos |
| 26 | STM32 Nucleo-64 Board | STM32F446RE or equivalent, ST-LINK on board. | 10 Nos |
| 27 | Raspberry Pi Pico W / Pico 2 W | With pre-soldered headers. | 10 Nos |
| 28 | Raspberry Pi 5 Kit | 8 GB RAM, active cooler, official 27 W PSU, 64 GB A2 microSD, case. | 10 sets |
| 29 | Raspberry Pi Camera Module 3 | 12 MP, autofocus, with ribbon cable. | 4 Nos |
| 30 | NVIDIA Jetson Orin Developer Kit (Nano / NX class) | 8 GB or higher, with PSU. Newer module generation than the TX2 class is required; older TX2 boards are not acceptable. | 5 Nos |
| 31 | LoRa Module Set | SX1262/SX1276 modules for the 865-867 MHz Indian band, antenna included. | 10 Nos |
| 32 | 4G LTE Modem Module | SIM7600 class, India band support, with antenna and USB interface. | 4 Nos |
| 33 | GNSS Module | u-blox M10 class, active antenna, UART/I2C breakout. | 4 Nos |
| 34 | Edge AI Accelerator | USB or M.2 neural accelerator, Intel Movidius NCS2 class, Google Coral or Hailo-8 (newer equivalents accepted), with host cable and SDK examples. | 4 Nos |
| 35 | IoT Sensor Master Kit | ≥50 modules including BME280, MPU6050/ICM-42688 IMU, VL53L1X ToF, HC-SR04 ultrasonic, IR obstacle and line-following sensors, MQ gas sensors, PIR, LDR, OLED, RC522 RFID, relay modules, rotary encoders, load cell + HX711, MAX30102 pulse/SpO2. Serves both IoT and robotics sensing. | 10 kits |
| 36 | Motor Driver and Power Electronics Kit | L298N/TB6612, BTS7960 (43 A), TMC2209/DRV8825, MOSFET and relay modules, buck/boost converters. | 10 kits |
Package 2: 3D Design and Printing
Installation location: Proto Lab (Lab 2) (specialty printers in Lab 3, see section C)
| S. No. | Item | Minimum Specification | Qty. |
|---|---|---|---|
| A. 3D Printing | A. 3D Printing | A. 3D Printing | A. 3D Printing |
| 37 | FDM 3D Printer (Standard) | Build volume ≥250 x 250 x 250 mm, direct-drive extruder, hotend ≥300 °C, heated bed ≥100 °C, auto bed levelling, filament run-out sensor, supports PLA/PETG/ABS/TPU. | 8 Nos |
| 38 | FDM 3D Printer (Large Format) | Build volume ≥400 x 400 x 400 mm, enclosed or enclosure-ready, hotend ≥300 °C, auto bed levelling. Reference class: Aeqon 400 V2 or equivalent. | 1 No |
| 39 | Resin 3D Printer (MSLA) | Build volume ≥218 x 123 x 250 mm, ≥8K mono LCD, XY resolution ≤30 µm. | 2 Nos |
| 40 | Resin Wash and Cure Station | Compatible with the quoted resin printers, heated wash, UV cure, timer. | 1 No |
| 41 | Filament Dryer / Dry Cabinet | 50 L electronic dry cabinet with humidity display, plus four single-spool filament dryers. | 1 + 4 Nos |
| 42 | Structured-Light 3D Scanner | Handheld, accuracy ≤0.1 mm, scan speed ≥0.5 million points/s, colour texture, export STL/OBJ/PLY, software included. | 1 No |
| B. Design Workstations and Software | B. Design Workstations and Software | B. Design Workstations and Software | B. Design Workstations and Software |
| 43 | CAD and Simulation Workstation | Intel Core i7 / Ryzen 7 or better, 32 GB RAM, 1 TB NVMe SSD, discrete GPU ≥12 GB VRAM (RTX 4070 class or better), 27" QHD monitor, keyboard, mouse; dual boot Windows 11 Pro and Ubuntu 22.04 with ROS 2 and Gazebo pre-installed. Also used for robotics simulation. | 10 Nos |
| 44 | Parametric 3D CAD/CAE Software Licences | SolidWorks / Fusion / Inventor or equivalent, 1-year subscription, ≥10 seats, licence must permit commercial startup use. | 10 seats |
| 45 | CAM Software Licences | CAM for the CNC router and milling machines (VCarve Pro / Fusion Manufacturing / Mastercam or equivalent), 1-year, commercial use permitted. | 2 seats |
| 46 | Digital Vernier Calliper | 0-150 mm, 0.01 mm resolution, stainless steel. | 10 Nos |
| 47 | Digital Micrometer | 0-25 mm, 0.001 mm resolution, calibration certificate. | 2 Nos |
| C. Specialty 3D Printing and Display (AIC priority list; installation in Fabrication Lab, Lab 3) | C. Specialty 3D Printing and Display (AIC priority list; installation in Fabrication Lab, Lab 3) | C. Specialty 3D Printing and Display (AIC priority list; installation in Fabrication Lab, Lab 3) | C. Specialty 3D Printing and Display (AIC priority list; installation in Fabrication Lab, Lab 3) |
| 48 | Silicone / Rubber 3D Printer | Paste or liquid-silicone extrusion printer for silicone (Shore 10A-60A) and rubber-like materials, pneumatic dispensing with cartridges ≥30 ml, heated curing bed, build volume ≥200 x 200 x 150 mm, slicer software included. | 1 No |
| 49 | 3D Bio Printer | Extrusion bioprinter for hydrogels and bioinks (non-clinical research and teaching use), ≥2 printheads, temperature-controlled printhead and bed (4-60 °C), build area ≥100 x 100 mm, UV or blue-light crosslinking, HEPA or enclosed chamber, sterile cartridges, software included. | 1 No |
| 50 | 3D Monitor | Autostereoscopic or active/passive-glasses 3D display, ≥27", 4K, for viewing CAD models and scans in 3D, with graphics-card compatibility list and glasses where needed. | 1 No |
Package 3: Drone, Robotics, Health-Tech and Agri-Tech
Installation location: Proto Lab (Lab 2)
| S. No. | Item | Minimum Specification | Qty. |
|---|---|---|---|
| A. Drone / UAV | A. Drone / UAV | A. Drone / UAV | A. Drone / UAV |
| 51 | Flight Controller Kit | Pixhawk 6C/6X class, PX4/ArduPilot compatible, GPS, power module, buzzer and safety switch. | 5 sets |
| 52 | Quadcopter Frame Kit (450 mm class) | Glass fibre / carbon, with landing gear and power distribution board. | 5 Nos |
| 53 | Hexacopter Frame Kit (650-800 mm) | Carbon fibre, foldable arms, payload mount. | 1 No |
| 54 | Propulsion Set | 4 BLDC motors, 4 ESCs (≥30 A), 4 propellers (9-10") per set. | 6 sets |
| 55 | Thrust and Motor Test Stand | ≥10 kg thrust, torque measurement, logs voltage, current, RPM, temperature and efficiency, USB software. | 1 No |
| 56 | LiPo Battery Pack Assortment | 3S/4S/6S, 2200-10000 mAh, XT60/XT90, branded. | 12 Nos |
| 57 | LiPo Balance Charger | ≥300 W dual-channel, 1-6S, with 24 V PSU. | 3 Nos |
| 58 | LiPo Safe Bag and Charging Box | Fire-retardant bags (15) and one fireproof charging box (2). | 15 + 2 Nos |
| 59 | RC Transmitter with Receivers | 2.4 GHz ELRS, ≥8 channels, with 2 receivers each. | 3 sets |
| 60 | Telemetry Radio Pair | 865-867 MHz licence-exempt Indian band, ≥1 km range, MAVLink compatible. | 4 pairs |
| 61 | 3-Axis Gimbal with Camera | 4K camera, gimbal controller, damped mount. | 1 No |
| 62 | Rangefinder / Optical Flow Module | TFmini / Matek class, for ArduPilot/PX4. | 4 Nos |
| 63 | Indoor Drone Flight Cage | ≥5 x 5 x 3 m, HDPE/nylon impact net on steel or aluminium frame, door, floor padding, anchored to floor. | 1 No |
| B. Robotics | B. Robotics | B. Robotics | B. Robotics |
| 64 | 6-DOF Desktop Robotic Arm | Payload ≥1 kg, repeatability ≤±0.1 mm, ROS/ROS 2 support, controller and software. | 3 Nos |
| 65 | Industrial 6-Axis Robotic Arm (Collaborative) | Payload ≥3 kg, reach ≥500 mm, repeatability ≤±0.05 mm, collision detection, teach pendant, ROS 2 driver, safety controller, mounting table; UR3e / Dobot CR class. | 1 No |
| 66 | Gripper and End-Effector Set | Electric parallel gripper, vacuum gripper and soft gripper compatible with the quoted arms, with mounting adaptors. | 3 sets |
| 67 | Educational Robotics Kit | Mindstorms-class programmable kit (e.g., LEGO Education SPIKE Prime or equivalent): hub, motors, colour/distance/force sensors, block and Python programming, storage tray. | 10 kits |
| 68 | Differential-Drive Mobile Robot Platform | ROS 2 compatible, wheel encoders, IMU, ≥5 kg payload, ≥2 h runtime, mounts for LiDAR and depth camera. | 5 Nos |
| 69 | 2D LiDAR | 360°, ≥12 m range, ≥8 kHz sample rate (RPLIDAR class). | 4 Nos |
| 70 | Depth Camera / 3D Scanning Sensor | Intel RealSense D435i, Orbbec Femto Bolt (Kinect-class) or Luxonis OAK-D or equivalent, with SDK and 3D-scanning software. | 4 Nos |
| 71 | Smart Serial Bus Servos | ≥20 kg·cm stall torque, feedback, daisy-chain, with controller board. | 10 Nos |
| 72 | Hobby Servo Assortment | MG996R / DS3218 class. | 20 Nos |
| 73 | Stepper Motor and Driver Kit | NEMA 17/23, TMC2209/DM542 drivers, cables. | 10 sets |
| 74 | DC Gear Motor with Encoder | 12/24 V, ≥100 rpm, Hall encoder. | 10 Nos |
| 75 | 4WD Robot Chassis Kit | Aluminium chassis, motors, wheels, mounting plates. | 6 Nos |
| C. Health-Tech | C. Health-Tech | C. Health-Tech | C. Health-Tech |
| 76 | Biosignal Acquisition Platform | ECG, EMG, EEG and EDA channels (ADS1298/AD8232/BITalino/OpenBCI class), USB/BLE, open SDK. | 3 sets |
| 77 | Reference Fingertip Pulse Oximeter | CE/ISO-certified, for validation use. | 3 Nos |
| 78 | IR Thermometer and Digital BP Monitor | CE/ISO-certified reference devices. | 2 each |
| 79 | ECG Simulator | Adjustable rate and rhythm, ≥12 lead output, for non-clinical testing. | 1 No |
| D. Agri-Tech | D. Agri-Tech | D. Agri-Tech | D. Agri-Tech |
| 80 | Soil Sensor Set | Capacitive moisture, EC, pH, NPK (RS485 Modbus) with probes. | 6 sets |
| 81 | Weather Station Sensor Set | Wind speed and direction, rain gauge, temperature, humidity, pressure; RS485/analog. | 1 set |
| 82 | Outdoor LoRa Gateway | 8-channel, 865-867 MHz, Ethernet/4G, IP65. | 1 No |
| 83 | Solar Power Kit | 100 W panel, MPPT controller, 12 V 20 Ah LFP battery. | 2 sets |
| 84 | Irrigation Test Bed | 12 V submersible pumps (4), 12 V solenoid valves (6), flow meters (4), drip kit, 100 L tank. | 1 set |
Package 4: Fabrication Lab and Pilot-Batch Production
Installation location: Fabrication Lab (Lab 3)
| S. No. | Item | Minimum Specification | Qty. |
|---|---|---|---|
| A. Digital Fabrication | A. Digital Fabrication | A. Digital Fabrication | A. Digital Fabrication |
| 85 | CO2 Laser Cutter (Large Format) | 100-130 W sealed CO2 tube, bed ≥1300 x 900 mm, honeycomb + knife table, autofocus, air assist, water chiller, exhaust blower with ducting, cuts ≥20 mm acrylic. | 1 No |
| 86 | Desktop CO2 Laser Engraver | Work area ≥600 x 300 mm, 40-60 W sealed CO2 tube, pass-through slot, autofocus, air assist, fume extraction, USB/Ethernet; Trotec Speedy 100 class. For fine engraving, small parts and student sessions. | 1 No |
| 87 | Fiber Laser Marking Machine | ≥50 W, field ≥110 x 110 mm, rotary attachment, fume extractor, supports metals and plastics. | 1 No |
| 88 | 3-Axis CNC Router | Bed ≥1220 x 2440 mm (full 8 x 4 ft sheet) [or 1300 x 900 mm if floor space is limited], Z travel ≥200 mm, 3-4.5 kW water-cooled spindle with VFD, vacuum table with pump, dust shoe, tool-length sensor; for wood, MDF, acrylic, ACP and light aluminium work. ShopBot class. | 1 No |
| 89 | Benchtop CNC Milling Machine | 3-axis, travel ≥400 x 250 x 200 mm, ≥1.5 kW spindle, rigid steel frame, safety enclosure, for aluminium and plastics. | 1 No |
| 90 | Desktop Precision Milling Machine (Wax / Mould / PCB) | Desktop 3-axis, work area ≥200 x 150 x 60 mm, spindle 6,500-15,000 rpm, step ≤0.01 mm; mills machinable wax, foam, plastics and FR4 (isolation milling, drilling, outline routing), with end-mill set, dust cover and software; Roland MDX-20 class. | 2 Nos |
| 91 | Vinyl Cutter (24 in) | Media width ≥610 mm, cutting force up to 200 gf, speed ≥500 mm/s, contour cutting with registration marks, stand and blades; also cuts copper foil for flexible circuits; Roland GX/RX-24 class. | 1 No |
| 92 | Bench Metal Lathe | ≥300 mm between centres, variable speed, with chuck, tool post and basic tool set. | 1 No |
| 93 | Programmable Burnout Furnace / Kiln | Programmable electric furnace, ≥1100 °C, chamber ≥200 x 200 x 200 mm, multi-segment controller, over-temperature cut-off, fume vent; for lost-wax casting, ceramics, glass and heat treatment; Neycraft Vulcan A-550 class. | 1 No |
| B. Woodworking and Metalworking Machines | B. Woodworking and Metalworking Machines | B. Woodworking and Metalworking Machines | B. Woodworking and Metalworking Machines |
| 94 | Table Saw | 10" blade, ≥1800 W, riving knife, blade guard, rip fence, mitre gauge. | 1 No |
| 95 | Benchtop Band Saw (Wood) | 10" class benchtop, throat ≥250 mm, ≥370 W, fence, mitre gauge, spare blades; Jet 10 class. | 1 No |
| 96 | Sliding Mitre Saw | 12", ≥1800 W, laser guide, dust bag. | 1 No |
| 97 | Drill Press | 16 mm chuck, ≥12 speeds, ≥750 W, with machine vice. | 2 Nos |
| 98 | Scroll Saw | 20" (≥500 mm) throat, variable speed 400-1750 SPM, cutting depth ≥50 mm, bevel tilt, blower and work light, blades included; DeWalt DW788 class. | 1 No |
| 99 | Belt and Disc Sander | ≥375 W, bench-mounted, 150 mm disc. | 1 No |
| 100 | Horizontal Metal Cutting Band Saw | ≥5" capacity, coolant, swivel vice. | 1 No |
| 101 | Inverter MIG/MMA Welding Machine | ≥200 A, 3-phase 415 V, with torch, earth clamp, regulator and starter consumables. | 1 No |
| 102 | Sheet Metal Bending Brake with Hand Shear | 1000 mm, 1.5 mm mild steel capacity. | 1 set |
| 103 | Bench Grinder | 8", ≥500 W, with spark guards and eye shields. | 1 No |
| 104 | Angle Grinder | 4", ≥900 W, with guard and discs. | 4 Nos |
| 105 | Silent Air Compressor | 2 HP, oil-free, ≥100 L tank, 8 bar, with hose and basic pneumatic tool kit. | 1 No |
| 106 | Industrial Dust Collector | ≥2 HP, ≥1200 m³/h, 2-stage cyclone, ducting and blast gates for saws, sander and CNC. | 1 set |
| 107 | Wet/Dry Shop Vacuum | ≥2000 W, ≥30 L. | 2 Nos |
| C. Portable Power Tools and Hand Tools | C. Portable Power Tools and Hand Tools | C. Portable Power Tools and Hand Tools | C. Portable Power Tools and Hand Tools |
| 108 | Cordless Drill-Driver | 18 V, 2 batteries, charger, 13 mm chuck, bit set. | 10 Nos |
| 109 | Cordless Impact Driver | 18 V, 2 batteries, charger. | 2 Nos |
| 110 | Corded Jigsaw | ≥700 W, orbital action, blade set. | 2 Nos |
| 111 | Hand Router with Bit Set | ≥1200 W, variable speed, 12-piece bit set. | 2 Nos |
| 112 | Random Orbital Sander | ≥300 W, dust bag. | 2 Nos |
| 113 | Heat Gun | ≥2000 W, two temperature settings. | 3 Nos |
| 114 | Rotary Tool Kit | ≥130 W, variable speed, 100+ accessories. | 2 Nos |
| 115 | Rivet Gun and Rivet-Nut Tool Kit | Hand riveter plus rivet-nut tool, M3-M8 mandrels. | 2 sets |
| 116 | Master Hand Tool Kit | Spanners 6-32 mm, hex keys (metric + imperial), ≥120-piece socket set, torque wrench, pliers set, screwdriver set, hammers, hacksaw, files. | 6 sets |
| 117 | Tap and Die Set | M3 to M12, in case. | 2 sets |
| 118 | Bench Vice | 125 mm jaw, swivel base. | 4 Nos |
| 119 | Clamp Assortment | F-clamps, C-clamps, bar clamps and ratchet clamps, ≥40 pieces in total. | 1 set |
| 120 | Measurement and Layout Set | Digital calliper 300 mm, steel rules, try square, digital spirit level, tape measures, scriber, centre punch. | 5 sets |
| 121 | Precision Weighing Scale | 6 kg x 0.1 g and 30 kg x 1 g platform scale. | 1 each |
| D. Pilot-Batch Electronics Production (50-100 units) | D. Pilot-Batch Electronics Production (50-100 units) | D. Pilot-Batch Electronics Production (50-100 units) | D. Pilot-Batch Electronics Production (50-100 units) |
| 122 | Semi-Automatic Stencil Printer | PCB up to ≥350 x 300 mm, precision alignment table, stencil frame or frameless, squeegee set. | 1 No |
| 123 | Tabletop Pick-and-Place Machine | Vision-assisted, ≥2 heads, ≥40 feeder slots, 0402 to QFP/QFN/BGA, ≥2500 CPH, PCB size ≥300 x 300 mm, software included. | 1 No |
| 124 | Reflow Oven | Forced-convection, programmable multi-stage profiles, lead-free capable (≥260 °C), PCB area ≥300 x 300 mm, USB profile logging. | 1 No |
| 125 | Solder Paste Refrigerator | 2-10 °C, ≥50 L, digital display. | 1 No |
| 126 | Dry Cabinet for MSD Components | ≥320 L, ≤5% RH, electronic display. | 1 No |
| 127 | Conformal Coating Station | Spray booth or hood with extraction, plus UV inspection lamp. | 1 No |
| 128 | Lab Drying / Curing Oven | ≥50 L, up to 250 °C, forced convection, digital controller. | 1 No |
| 129 | Automatic Wire Cutting and Stripping Machine | 0.5-6 mm² wire, programmable length and strip length. | 1 No |
| 130 | Ratchet Crimping Tool Kit | Dupont, JST, Molex, XT60/XT90, Anderson, ferrules and lugs. | 2 sets |
| 131 | Hydraulic Crimping Tool | 6-120 mm² lugs, with dies. | 1 No |
| 132 | Heat Shrink Gun | Variable temperature, ≥1800 W. | 2 Nos |
| 133 | Thermal Transfer Label Printer | 4", ≥300 dpi, USB/LAN, QR/barcode support. | 1 No |
| 134 | Barcode / QR Scanner | 2D, USB, handheld. | 2 Nos |
| 135 | Impulse Heat Sealer and Packing Station | Impulse sealer ≥400 mm, shrink wrap and packing table. | 1 set |
| E. Sustainable Product Lab (Greentown): Heating and Pressing | E. Sustainable Product Lab (Greentown): Heating and Pressing | E. Sustainable Product Lab (Greentown): Heating and Pressing | E. Sustainable Product Lab (Greentown): Heating and Pressing |
| 136 | Ceramic Band Heater | 230 V, 250-400 W, ≥300 °C, inner diameter [__ mm to suit barrel; bidder to propose 40-60 mm], with terminals and clamp. | 5 Nos |
| 137 | Cartridge Heater | Ø10-12 mm, 100-200 W, 230 V, stainless steel sheath, length ≥50 mm, max 400 °C, thermocouple pocket. | 5 Nos |
| 138 | PID Temperature Controller | Digital, 48 x 48 mm, universal input (K-type / PT100), SSR output, auto-tune, 230 V, supplied with 25 A SSR and heat sink and K-type thermocouple. | 5 Nos |
| 139 | Hydraulic Press | [≥10 tonne; confirm], heated platens ≥250 x 250 mm up to 250 °C, digital temperature control, pressure gauge, safety guard, for compression moulding of recycled plastics. | 2 Nos |
Package 5: EV and BMS Lab
Installation location: EV and BMS Lab (Lab 1)
| S. No. | Item | Minimum Specification | Qty. |
|---|---|---|---|
| A. Battery Test and Characterisation | A. Battery Test and Characterisation | A. Battery Test and Characterisation | A. Battery Test and Characterisation |
| 140 | Cell-Level Battery Tester / Cycler | ≥8 independent channels, 0-5 V, ≥10 A per channel, CC/CV charge, CC/CP/pulse discharge, accuracy ±0.05%, temperature inputs, report software (capacity, DCIR); supports 18650/21700/pouch. | 1 No |
| 141 | Pack-Level Battery Tester / Cycler | Up to 100 V, ≥30 A, 2 channels, charge/discharge, CAN/Ethernet, data logging, safety interlocks; energy-regenerative preferred. | 1 No |
| 142 | Programmable DC Electronic Load | 0-150 V, ≥40 A, ≥1 kW, CC/CV/CR/CP, transient and battery-discharge modes, SCPI. | 1 No |
| 143 | High-Power Programmable DC Power Supply | 0-100 V, ≥15 A, ≥1.5 kW, CAN/Ethernet/USB, SCPI. | 1 No |
| 144 | Battery Impedance / OCV Tester | 4-wire, 1 kHz AC, 0-100 V, accuracy ≤0.5%, with probes. | 2 Nos |
| 145 | Cell Capacity Grader and Sorter | 16 channels, 18650/21700, automatic sorting reports. | 1 No |
| 146 | Battery Pack Spot Welder | Pulse type, ≥3.6 kW, welds 0.1-0.3 mm nickel strip for 18650/21700. | 1 No |
| 147 | Cell Demonstrator and Battery Pack Assembly Kit | Training kit showing cell to module to pack build: cell holders, busbars, nickel strip, fish paper, sample BMS, enclosure, insulated tools and assembly guide; cells supplied separately (Package 7); compatible with the spot welder. | 1 kit |
| 148 | Temperature Chamber | ≥100 L, -20 to +80 °C, programmable profiles, with cable port. | 1 No |
| B. BMS Development and Test | B. BMS Development and Test | B. BMS Development and Test | B. BMS Development and Test |
| 149 | BMS Test Bench / Cell Simulator | ≥16 channels, 0-5 V ±1 mV, ≥100 mA per channel, NTC temperature simulation, fault injection, isolated, USB/LAN control. | 1 No |
| 150 | BMS Development Kits | Evaluation boards from three different AFE families (e.g., TI BQ76952, ADI LTC6811/ADBMS, NXP MC33771, or equivalent), 4S-16S. | 6 sets |
| 151 | BMS Training Rig with 2 kWh Battery Pack | Training rig with ≈2 kWh pack (≥48 V LFP/NMC), 13S-16S smart BMS with display, contactors, pre-charge, current shunt, fault-injection panel, CAN/UART interface, programmable load port, transparent safety enclosure and experiment manual. | 1 No |
| 152 | Training Battery Packs with Smart BMS | LFP 12.8 V 20 Ah, transparent enclosure, UART/CAN BMS, datasheets and test reports. | 4 Nos |
| C. Motor and Powertrain | C. Motor and Powertrain | C. Motor and Powertrain | C. Motor and Powertrain |
| 153 | Power Analyser | 4 channels, up to 1000 V, bandwidth DC-1 MHz, accuracy ≤0.1%, motor evaluation inputs (torque, speed). | 1 No |
| 154 | Isolated Oscilloscope with HV Probes | 4 isolated channels, ≥200 MHz, 2 high-voltage differential probes (≥1 kV), 2 AC/DC current probes. | 1 set |
| 155 | Induction Motor Characterisation Rig | 3-phase induction motor ≥1.5 kW with VFD, load machine or brake, torque-speed sensor ±0.2%, measures V/I/P/PF/efficiency, speed-torque and V/f curves, data acquisition software and experiment manual. Bidder may offer one modular dynamometer bench supporting all three motor rigs, provided all three configurations are supplied. | 1 No |
| 156 | BLDC Motor Characterisation Rig | BLDC/PMSM motor ≥1 kW with controller, load brake, torque-speed sensor ±0.2%, back-EMF, Kt/Ke and efficiency tests, data acquisition software and experiment manual. | 1 No |
| 157 | Motor-Generator Performance Mapping Rig | Four-quadrant coupled motor/generator set, ≥3 kW, ≥6000 rpm, ≥10 Nm, automatic torque-speed grid sweep with efficiency maps, regeneration test, DC bus monitoring. | 1 No |
| 158 | EV Bench-Level Simulator | Bench-top EV emulator with integrated motor, controller, battery/DC-bus and load emulation; runs standard drive cycles (IDC/WLTP) and shows speed, torque, SoC, range and regenerative energy; data logging. | 1 No |
| 159 | EV Vehicle Algorithm Developer Platform | Rapid control prototyping platform for vehicle control unit, motor control (FOC), BMS SoC estimation and regenerative braking; MATLAB/Simulink-compatible, CAN, PWM/ADC I/O, four FOC controller boards (48 V, ≥60 A peak, open firmware), courseware. | 1 platform |
| 160 | CAN / CAN-FD Analyser Interface | USB, 2 channels, CAN-FD, J1939/OBD-II/UDS software support (Kvaser, PEAK, Vector or equivalent). | 4 Nos |
| 161 | Two-Wheeler EV Conversion Kit (Vehicle Not Included) | Conversion kit for an ICE two-wheeler: 48-60 V BLDC hub/mid motor ≥1.5 kW, controller, throttle, ≥2 kWh LFP/NMC battery with BMS, DC-DC converter, display, harness, regenerative braking, mounting brackets, instrumented measurement points for teaching. The vehicle will be provided by the purchaser. | 1 kit |
| D. Demonstrators and Electrical Safety Instruments | D. Demonstrators and Electrical Safety Instruments | D. Demonstrators and Electrical Safety Instruments | D. Demonstrators and Electrical Safety Instruments |
| 162 | EV Charging System | Training-grade charging system: programmable 48-72 V, ≥10 A charger with CAN control and session data logging, with supply-equipment interface as per applicable Indian standards (IS 17017 series / LECCS for light EVs); for use with the conversion kit and training packs. | 2 Nos |
| 163 | Insulation Resistance Tester | Up to 5 kV, PI and DAR measurement, ≥1 TΩ. | 1 No |
| 164 | Earth Resistance Tester | 3/4-pole, digital. | 1 No |
| 165 | DC Clamp Meter | True-RMS, ≥1000 A DC/AC. | 4 Nos |
| 166 | Infrared Thermometer | -50 to 550 °C, laser pointer. | 4 Nos |
| E. Battery Safety and High-Voltage PPE | E. Battery Safety and High-Voltage PPE | E. Battery Safety and High-Voltage PPE | E. Battery Safety and High-Voltage PPE |
| 167 | Fire-Resistant Battery Charging and Storage Cabinet | ≥90 min fire resistance (EN 14470-1 Type 90 or equivalent), ventilated, lockable, ≥2 shelves, internal power sockets. | 2 Nos |
| 168 | Lithium-Ion Fire Extinguisher | Suitable for Li-ion fires (aqueous vermiculite / water-mist type or equivalent), ≥6 L. | 4 Nos |
| 169 | Fire Blanket for Battery Fires | Large, ≥2 m x 3 m, high-temperature rated, with storage case. | 2 Nos |
| 170 | Class 0 (1000 V) Insulating Gloves | With leather protector gloves, size assortment, tested to IEC 60903 or equivalent. | 6 pairs |
| 171 | 1000 V Insulated Tool Kit | VDE/IEC 60900 certified. | 3 sets |
| 172 | Insulating Rubber Mat | 1 m x 5 m roll, rated ≥1000 V. | 3 Nos |
| 173 | Arc-Rated Face Shield | With head gear and carry case. | 4 Nos |
| 174 | Lockout-Tagout (LOTO) Kit | Padlocks, hasps, tags, breaker lockouts. | 3 kits |
Package 6: Furniture, Networking and Safety (All Labs)
Installation location: All three labs
| S. No. | Item | Minimum Specification | Qty. |
|---|---|---|---|
| A. Furniture and Storage | A. Furniture and Storage | A. Furniture and Storage | A. Furniture and Storage |
| 175 | ESD-Safe Electronics Workbench | 1500 x 750 mm, ESD laminate top (10⁶-10⁹ Ω), overhead shelf, 6 sockets, earthing point, ≥300 kg load, drawer. | 10 Nos |
| 176 | Heavy-Duty Fabrication Workbench | 1800 x 800 x 850 mm, hardwood or 3 mm steel top, ≥500 kg load, vice-mount ready. | 4 Nos |
| 177 | ESD Assembly Line Table | 2400 x 750 mm, ESD top, shelf, power strip. | 4 Nos |
| 178 | ESD Small-Parts Drawer Cabinet | 60 drawers, anti-static. | 10 Nos |
| 179 | Team Lockers for Startups | Steel, lockable, 2 compartments each. | 12 Nos |
| 180 | Heavy-Duty Steel Racks | 6 ft, 5 shelves, ≥150 kg per shelf. | 8 Nos |
| 181 | Tool Wall / Shadow Boards | Perforated steel panels with hooks. | 6 Nos |
| 182 | ESD Chairs and Stools | Conductive, adjustable height. | 30 Nos |
| 183 | Tool Trolley with Drawers | Steel, ≥5 drawers, lockable, castors. | 4 Nos |
| 184 | Plastic Storage Bins with Rails | Assorted sizes with metal brackets. | 200 Nos |
| 185 | Flammable Storage Cabinet | 45 L, ≥30 min fire rating, ventilated. | 2 Nos |
| 186 | Glass / Whiteboards | 1200 x 900 mm, wall-mounted. | 3 Nos |
| B. Power Back-Up, Networking and Access | B. Power Back-Up, Networking and Access | B. Power Back-Up, Networking and Access | B. Power Back-Up, Networking and Access |
| 187 | Online UPS | 10 kVA, double conversion, ≥15 min backup, for Proto Lab critical circuits; final sizing after load calculation. | 1 No |
| 188 | Managed PoE+ Network Switch | 24 port, VLAN support. | 1 No |
| 189 | Wi-Fi 6 Access Point | Ceiling mount, PoE, managed. | 3 Nos |
| 190 | CCTV System | 12 x 4 MP cameras, 16-channel NVR, ≥8 TB storage, 30-day retention. | 1 set |
| 191 | RFID / Biometric Access Control | Door controller with logs, for 3 doors. | 3 Nos |
| 192 | Interactive Display | 75", 4K, touch, with mobile stand, for training and FDP sessions. | 2 Nos |
| C. Fire, First Aid and Personal Protective Equipment | C. Fire, First Aid and Personal Protective Equipment | C. Fire, First Aid and Personal Protective Equipment | C. Fire, First Aid and Personal Protective Equipment |
| 193 | Smoke and Heat Detection System | Conventional panel with 3 zones, detectors and sounders covering all three labs. | 1 set |
| 194 | ABC Dry Powder Fire Extinguisher | 4 kg, ISI marked. | 8 Nos |
| 195 | CO2 Fire Extinguisher | 4.5 kg, ISI marked. | 4 Nos |
| 196 | Class D Fire Extinguisher | For metal fines (aluminium, magnesium), ≥5 kg. | 2 Nos |
| 197 | Industrial First Aid Kit | Wall-mounted, burn dressings, eyewash, tourniquet. | 3 Nos |
| 198 | Eyewash Station | Portable or wall-mounted, ≥16 L. | 2 Nos |
| 199 | Safety Goggles | Anti-fog, ANSI Z87.1 or IS 5983 equivalent. | 40 Nos |
| 200 | Laser Safety Glasses | OD 6+ at 10.6 µm (CO2) and 1064 nm (fiber). | 4 each |
| 201 | Auto-Darkening Welding Helmet with Gloves and Apron | Shade 9-13, leather gloves and apron. | 2 sets |
| 202 | Hearing Protection | Ear muffs, ≥25 dB NRR. | 30 Nos |
| 203 | Respirators | Half-mask with P100 and organic vapour cartridges (6) plus FFP2 masks (100). | 6 + 100 Nos |
| 204 | Cut-Resistant Gloves | Level 5, assorted sizes. | 30 pairs |
| 205 | ESD Smocks and Wrist Straps | Smocks (30) and wrist straps with cords (40). | 30 + 40 Nos |
| 206 | HEPA Air Purifier | For resin printing and dust areas, CADR ≥500 m³/h. | 2 Nos |
| 207 | Dehumidifier | ≥20 L/day, for component storage rooms. | 2 Nos |
| 208 | Safety Signage Set | Lab rules, PPE, hazard, exit and emergency signage for all three labs. | 1 set |
Package 7: Starter Consumables and Component Stock (3 months)
Installation location: All three labs
| S. No. | Item | Minimum Specification | Qty. |
|---|---|---|---|
| A. 3D Printing and Fabrication Materials | A. 3D Printing and Fabrication Materials | A. 3D Printing and Fabrication Materials | A. 3D Printing and Fabrication Materials |
| 209 | PLA Filament | 1.75 mm, 1 kg spools, assorted colours, ±0.03 mm tolerance. | 60 spools |
| 210 | PETG Filament | 1.75 mm, 1 kg spools. | 30 spools |
| 211 | ABS / ASA Filament | 1.75 mm, 1 kg spools. | 15 spools |
| 212 | TPU Filament | 1.75 mm, 95A, 0.5 kg spools. | 10 spools |
| 213 | Standard Photopolymer Resin | 1 kg bottles, 405 nm, compatible with quoted printers. | 10 bottles |
| 214 | Isopropyl Alcohol (IPA) | ≥99%, 5 L can. | 4 cans |
| 215 | Acrylic Sheets | 3 mm and 5 mm, 8 ft x 4 ft, assorted colours. | 4 sheets each |
| 216 | BWP Plywood and MDF | 6, 12 and 18 mm, 8 ft x 4 ft. | 4 sheets each |
| 217 | Sheet Metal and Aluminium Extrusion | MS 1-2 mm and SS 304 1 mm sheets (1.2 x 2.4 m, 2 each); aluminium sheet 1 and 2 mm; 2020 and 3030 T-slot profile, 3 m lengths, with fastener kits. | Assorted |
| 218 | Machinable Wax Blocks | Modelling/milling wax, assorted sizes up to 100 x 100 x 50 mm. | 20 blocks |
| 219 | Adhesive Vinyl Rolls and Copper Foil | Vinyl rolls 610 mm x 5 m, assorted colours (6); copper foil with conductive adhesive, 5 m (4). | 6 + 4 rolls |
| 220 | Milling End Mill and Engraving Bit Set | Carbide flat and ball end mills 1/64" to 1/8", V-bits for PCB isolation; for the desktop milling machines and CNC router. | 2 sets |
| 221 | Silicone Cartridges and Bio-ink Starter Kit | As recommended by the OEM of the silicone printer and bio printer: silicone cartridges (≥10) and hydrogel/bio-ink starter materials with sterile cartridges (≥20). | 1 lot |
| 222 | OEM Starter Consumables Pack | For every machine and instrument supplied: blades, nozzles, tips, bits, filters, lubricants and cleaning supplies for ≥3 months of use, as recommended by the OEM; itemised in the commercial bid. | 1 set per machine |
| 223 | Fastener and Insert Kits | Metric M2-M8 screws, nuts, washers, heat-set inserts, rivets. | 6 kits |
| 224 | Paint, Primer and Thinner | PU paint and primer, 1 L, plus 20 L thinner. | 5 + 5 + 1 |
| B. Electronics Consumables and Components | B. Electronics Consumables and Components | B. Electronics Consumables and Components | B. Electronics Consumables and Components |
| 225 | Solder Wire | SAC305 lead-free, 0.8 mm, 500 g spool, with flux core. | 10 spools |
| 226 | Solder Paste | Type 4, lead-free, 500 g jar with syringes. | 4 jars |
| 227 | Flux and Desoldering Braid | No-clean flux pen/gel plus desoldering braid. | 10 + 20 Nos |
| 228 | Breadboards and Jumper Wires | 830-point breadboards, M-M, M-F and F-F jumper sets. | 30 + 30 sets |
| 229 | Hook-Up Wire Assortment | Silicone wire 30-16 AWG, assorted colours, 10 m spools. | 1 set |
| 230 | SMD Resistor and Capacitor Kits | 0402/0603/0805, E24, ≥1% tolerance. | 2 each |
| 231 | Through-Hole Component Kits | Resistors, capacitors, diodes, transistors, LEDs, ICs. | 3 sets |
| 232 | Connector Assortment | JST-XH, Dupont, XT60/XT90, Anderson, terminal blocks. | 1 set |
| 233 | Copper Clad Boards | Single- and double-sided FR4, 1.6 mm, 100 x 150 mm and larger. | 50 pcs |
| 234 | Kapton Tape and Heat Shrink Assortment | Kapton 10-50 mm, heat shrink 2-25 mm. | 1 set |
| C. Battery and EV Materials | C. Battery and EV Materials | C. Battery and EV Materials | C. Battery and EV Materials |
| 235 | Li-Ion Cells | Branded 18650/21700, 2500-5000 mAh, with datasheets. | 200 Nos |
| 236 | LiFePO4 Prismatic Cells | 3.2 V, 50-100 Ah, grade A, matched. | 16 Nos |
| 237 | Nickel Strip | 0.15 mm, 8 mm wide, pure nickel. | 5 kg |
| 238 | Nitrile Gloves | Box of 100, assorted sizes. | 10 boxes |
Package 8: AR/VR and Future Technology
Installation location: AR/VR Lab and Future Technology Lab (AIC plan; separate rooms from Labs 1 to 3)
| S. No. | Item | Minimum Specification | Qty. |
|---|---|---|---|
| A. AR/VR Lab | A. AR/VR Lab | A. AR/VR Lab | A. AR/VR Lab |
| 239 | Standalone VR Headset | Meta Quest 3/3S class: standalone 6DoF, ≥128 GB, colour passthrough, two controllers, hand tracking, ≥2 h battery, head strap and case; developer mode enabled. | 20 Nos |
| 240 | VR Headset Charging and Storage Cabinet | Lockable, ventilated, for 20 headsets with controllers, charging points and cable management. | 1 No |
| 241 | PC-Tethered VR Headset | HTC Vive Pro 2 / Dell Visor class: ≥2448 x 2448 per eye, ≥120 Hz, SteamVR-compatible tracking with two base stations and controllers. | 2 Nos |
| 242 | AR/LiDAR Tablet | iPad Pro 11" or 12.9" with LiDAR scanner, ≥256 GB, Wi-Fi, Apple Pencil, protective case. | 3 Nos |
| 243 | Android Tablet | ≥10", ≥8 GB RAM, ≥128 GB, ARCore-certified, with case, stylus and charger. | 5 Nos |
| 244 | Premium Gaming Laptop | Intel Core i9 / Ryzen 9, 32 GB DDR5, 1 TB NVMe, NVIDIA RTX 4070 8 GB class or better, 16" QHD ≥165 Hz, VR-ready ports, Windows 11. | 5 Nos |
| 245 | VR Casting Smart TV | 55", 4K UHD, Google/Android TV, built-in Chromecast / Miracast / AirPlay, HDMI 2.1, wall mount. | 2 Nos |
| 246 | XR Collaboration Platform Licence | Loop Metaverse (or equivalent) multi-user VR/AR classroom platform, 1-year, ≥30 concurrent users. | 1 licence |
| B. Future Technology Lab | B. Future Technology Lab | B. Future Technology Lab | B. Future Technology Lab |
| 247 | Stereo Depth Camera | ZED 2i class: stereo depth to ≥20 m, built-in IMU, USB 3, SDK for ROS and Unity. | 1 No |
| 248 | Optical See-Through AR Glasses | Epson Moverio class: binocular see-through, ≥1920 x 1080 per eye, USB-C video input, camera, IMU, weight ≤150 g. | 2 Nos |
| 249 | 360-Degree Camera | Ricoh Theta Z1 class: dual 1-inch sensors, ≥4K video, ≥23 MP stills, RAW, Wi-Fi/USB. | 1 No |
| 250 | Omnidirectional VR Treadmill | Virtuix Omni class: harness, support ring, shoes/sensors, SDK, user weight up to 120 kg. | 1 No |
| 251 | Hand-Tracking Controller | Ultraleap Leap Motion Controller 2 class: ≥140° field of view, USB-C, Unity/Unreal SDK. | 2 Nos |
Package 9: AI/ML Compute and Cybersecurity
Installation location: AI/ML Lab and Cybersecurity Lab (AIC plan; separate rooms from Labs 1 to 3)
| S. No. | Item | Minimum Specification | Qty. |
|---|---|---|---|
| A. AI/ML Lab | A. AI/ML Lab | A. AI/ML Lab | A. AI/ML Lab |
| 252 | GPU Compute Server (4-GPU, 2U) | Dual Intel Xeon Scalable 3rd gen or newer (≥52 cores total, Platinum 5320 class), Intel LGA 4189 board supporting 4 dual-width GPUs, 256 GB ECC DDR4 (16 DIMM slots, expandable to ≥2 TB), 2 TB NVMe + 500 GB SATA SSD, 8 hot-swap bays, 4 x NVIDIA RTX A6000 48 GB (or newer ≥48 GB GPUs), 1+1 redundant 1600 W 80 PLUS Platinum PSU, dual-port GbE + management LAN, BMC with KVM-over-IP, 2U rack, Ubuntu 22.04 LTS or later with AI/DL libraries, remote SSH access, 3-year on-site warranty, BIS/CE/FCC compliance. | 2 Nos |
| 253 | Tableau Creator Licence | 1-year subscription, academic pricing where available. | 5 licences |
| 254 | IBM Cognos Analytics with Watson Licence | 1-year subscription, academic pricing where available. | 1 licence |
| B. Cybersecurity Lab | B. Cybersecurity Lab | B. Cybersecurity Lab | B. Cybersecurity Lab |
| 255 | Rack Server (Intel Xeon) | 2U, Intel Xeon Scalable (≥16 cores), 128 GB ECC RAM, 2 x 1.92 TB SSD (RAID 1), dual PSU, 4 x 1 GbE, BMC remote management, 3-year on-site warranty. | 2 Nos |
| 256 | High-Performance Workstation | Current-generation Intel Core i9 or AMD Ryzen 9, 64 GB RAM, 1 TB NVMe SSD, 24" monitor, keyboard, mouse, Windows 11 Pro / Ubuntu dual boot, 3-year warranty. | 25 Nos |
| 257 | Next-Generation Firewall with VPN and IDPS | ≥5 Gbps firewall throughput, ≥1 Gbps IPS throughput, IPsec/SSL VPN for ≥200 users, application control, web filtering, central logging, HA-ready, 3-year subscription. Covers firewall, VPN and IDPS in one appliance. | 1 No |
| 258 | OSINT and NLP Software Stack Installation | Installation and configuration of Scrapy, Beautiful Soup, NLTK, Gensim and Jupyter (open source) on the servers and workstations, with documentation and a hands-on handover. | 1 lot |
5. Terms and Conditions
The following Terms and Conditions apply to all bidders participating in the tender for the supply, installation, and commissioning of equipment, tools, and machines for the establishment of an AIC Lab. All prospective vendors are required to read and comply with these terms in their entirety.
General Information
All equipment and materials must be delivered in the quantities and specifications as mentioned in the purchase order issued by the purchaser. The delivery location will be specified in the purchase order. The entire contract shall remain valid for a period of Two (2) months from the date of award.
Quotations submitted by bidders must remain valid for a minimum of 60 days from the final date of submission. Any quotation that does not meet this validity period will be considered non-compliant.
Bid Submission Guidelines
Bids may be submitted either via email (digitally signed) or in hard copy form, as specifically mentioned in the tender notice. All quotations must be printed on the bidder's official letterhead and duly signed by an authorized representative.
Each bid must be complete in all respects and must include the following mandatory documents:
Detailed Profile of the Bidder, highlighting experience and key competencies.
Copy of the Company/Firm Registration Certificate.
Copy of valid GST Registration Certificate.
Copy of submitted GST return (at least up to November 2024).
Copy of valid PAN Card.
Copies of Work Completion or Experience Certificates of similar completed works.
Valid Shop Establishment License or Factory License.
Genuine Manufacturer Authorization Form (MAF), which will be subject to verification with the respective OEM.
Bidder should provide an Escalation Matrix for training, service and after sales support.
Valid EPF, ESIC, and Professional Tax Registration Certificates (where applicable).
Self-Declaration/Affidavit (on ₹500/- Stamp Paper) regarding no blacklisting from IITs/NITs/Govt. Offices/PSUs/Autonomous Bodies.
Complete, signed, and stamped tender document including amendments and deviation sheets, if any (to be uploaded online only).
Declaration of agreed specifications on company letterhead, duly signed and stamped.
Any other documents in support of technical eligibility.
Technical Documentation and Compliance
The bidder must furnish complete technical documentation for each quoted item. This includes detailed product specifications, installation manuals, operation and maintenance manuals. The bidder is also required to submit a layout/design proposal aligned with the lab setup requirements, highlighting compliance points against the tender specifications.
Original technical brochures or scanned versions of product catalogs should be submitted with the bid. Wherever available, URLs to the OEM’s official product page should also be provided for cross- verification.
Each bidder must clearly mention the make, model, and complete technical specifications for the equipment being offered. A compliance sheet responding to each technical requirement outlined in the tender must be prepared and duly signed.
Eligibility and Qualification Criteria
All bidders must be OEMs or authorized partners/distributors or turnkey partners with valid authorization for th products they are quoting. Authorization letters must be submitted on the official letterhead.
Bidders must demonstrate relevant experience by submitting a minimum of three Purchase Orders (executed within the last five years) for similar equipment supplied to academic, R&D, or industrial institutions. A list of at least five institutional clients (with contact information) must be provided as a reference.
It is mandatory that the bidder or OEM has a registered support office in India to provide warranty and after-sales support. In the case of imported equipment, either the OEM or their authorized seller must submit a certificate confirming the presence of such a service support facility in India.
Financial Criteria
Prices quoted must be inclusive of all taxes (GST, customs, etc.), transportation, packaging, insurance, unloading, installation, commissioning, and training charges. There shall be no extra claim under any circumstances after the finalization of the bid.
The quoted prices must be firm and fixed throughout the duration of the contract. No escalation in price will be allowed under any pretext.
Evaluation and Award of Contract
All bids will be evaluated on the basis of compliance with the technical specifications, completeness of submitted documentation, financial eligibility, and price competitiveness. The contract shall be awarded to the bidder whose offer is determined to be technically responsive and lowest in cost.
The purchaser reserves the absolute right to reject any or all bids without assigning any reason. The final decision on selection will be at the sole discretion of the purchaser and shall be binding on all parties.
Warranty, Training and After-Sales Service
All equipment must carry a minimum onsite warranty of at least three years from the date of successful installation and commissioning. During this warranty period, the bidder shall repair or replace any defective items at no additional cost to the purchaser. All associated transportation, testing, and labor costs shall be borne by the bidder.
In case of any service delay or failure to resolve issues during the warranty period, the purchaser reserves the right to invoke penalties or reject future business from the vendor.
Payment Terms
Payment shall be released only after the successful supply, installation, and commissioning of the equipment. Final inspection and acceptance will be carried out by the purchaser’s technical committee.
No payment shall be made for equipment that is received in damaged condition, is non-functional, or fails to meet the required specifications. The bidder must submit all necessary documentation (delivery challans, installation report, warranty documents, training certificate, invoice, etc.) to process payment.
Other Conditions
No bidder shall be given preference based on category, class, or affiliation. The procurement may be extended to additional phases (e.g., Phase II) depending on availability of funds and institutional requirements.
Delayed delivery or installation may result in cancellation of order or imposition of penalties, as deemed fit by the purchaser. The scope of the supply and service must be entirely as per the BoQ and technical specifications.
21. Submission Deadline and Contact Details
21.1 All quotations must be submitted by 15-11-2026 by email to ceo.aic@gnits.ac.in or in a sealed cover, super-scribed "Tender for Hardware Labs", addressed to:
Dr. Sushmitha Sundar, Chief Executive Officer (CEO), AIC-GNITS Foundation
A305, Admin Block, 3rd Floor, #8-1-297/2/1, G. Narayanamma Institute of Technology and Science (for Women), Shaikpet, Hyderabad - 500 104, Telangana
21.2 Contact person: Dr. Sushmitha Sundar, CEO, AIC-GNITS Foundation. Email: ceo.aic@gnits.ac.in. Website: www.aic.gnits.ac.in.
