AIC Tenders & Procurement

Date: 06-11-2026

TENDER DOCUMENT

Supply, Installation and Commissioning of Equipment, Tools and Materials for the Prototyping Lab, Fabrication Lab, EV & BMS Lab and Allied AIC Labs

Atal Incubation Centre, supported by NITI Aayog – Atal Innovation Mission; hosted at G. Narayanamma Institute of Technology and Science (for Women)

8-1-297/2/1, Shaikpet Main Road Tolichowki, Ambedkar Nagar, Hyderabad, Telangana, India, 500008

1. Tender Notice

Sealed/online tenders are invited from reputed and experienced suppliers, manufacturers, or authorized distributors for the supply, installation, commissioning and training of equipment, tools, machines and materials required to set up three hardware innovation laboratories at AIC-GNITS Foundation, hosted at G. Narayanamma Institute of Technology and Science (for Women), Hyderabad:

Lab 1: EV and BMS Lab - for learning and exploring electric vehicles and battery management systems, technical discussions and faculty development programmes.

Lab 2: Proto Lab (Prototyping Lab) - for rapid prototyping across electronics, IoT, robotics, drones, health-tech, energy-tech and 3D design and printing.

Lab 3: Fabrication Lab - for building first product versions and manufacturing pilot batches of 50 to 100 units.

Packages 8 and 9 cover the AR/VR, Future Technology, AI/ML and Cybersecurity labs from the AIC equipment plan, which are housed in separate rooms. The detailed list of items and minimum specifications is enclosed with this document. The tender is divided into nine packages so that specialist suppliers can participate. Bidders may quote for one or more packages but must quote for all items within each package they bid for.

NOTE: Preference shall be given to turnkey vendors whose proposed technical solutions, equipment configurations and implementation approach best align with the innovation objectives, functional requirements and budgetary provisions of the Incubator, while ensuring value for money and long-term utility in a phase-wise manner.

2. Key Dates

EventDate and Time
Tender issue date06-11-2026
Last date and time for submission of bids15-11-2026, 5:00 PM
Purchase orders to be placed by25-11-2026

3. Packages and Delivery Schedule

PackageDescriptionLabDelivery from PO
Package 1Electronics Test & Measurement, Rework and Development BoardsProto Lab (Lab 2)2 weeks
Package 23D Design and PrintingProto Lab (Lab 2)2 weeks
Package 3Drone, Robotics, Health-Tech and Agri-TechProto Lab (Lab 2)2 weeks
Package 4Fabrication Lab and Pilot-Batch ProductionFabrication Lab (Lab 3)2 weeks
Package 5EV and BMS LabEV and BMS Lab (Lab 1)2 weeks
Package 6Furniture, Networking and SafetyAll three labs2 weeks
Package 7Starter Consumables and Component StockAll three labs2 weeks
Package 8AR/VR and Future TechnologyAR/VR and Future Tech Labs (AIC)2 weeks
Package 9AI/ML Compute and CybersecurityAI/ML and Cybersecurity Labs (AIC)2 weeks
Scope boundary: Civil work, electrical wiring, earthing, air-conditioning and ventilation of the labs are not part of this tender and will be handled under a separate work order. The selected bidder must furnish power (single/three-phase, kW), earthing, compressed-air, water, exhaust and floor-load requirements for each machine within three (3) working days of receiving the purchase order.

4. Bill of Quantities and Minimum Specifications

Specifications are minimum requirements. Brand and model names, where mentioned, are indicative only; equivalent or better products are acceptable if every listed parameter is met or exceeded and the deviation is declared in the technical compliance sheet. Quantities are based on hands-on training sessions for 20 to 30 students at a time and may be varied by the purchaser at the same rates and terms.

Package 1: Electronics Test & Measurement, Rework and Development Boards

Installation location: Proto Lab (Lab 2)

S. No.ItemMinimum SpecificationQty.
A. Test and Measurement EquipmentA. Test and Measurement EquipmentA. Test and Measurement EquipmentA. Test and Measurement Equipment
1Digital Storage Oscilloscope4 analog channels, ≥100 MHz bandwidth, ≥1 GSa/s per channel, ≥10 Mpts memory, ≥7" display, serial decode (I2C, SPI, UART, CAN), FFT, USB/LAN, four passive probes supplied.5 Nos
2Mixed-Signal Oscilloscope4 analog + 16 digital channels, ≥200 MHz, ≥2 GSa/s, ≥50 Mpts memory, serial trigger and decode, USB/LAN.1 No
3Programmable Linear DC Bench Power SupplyMulti-channel programmable linear type: 3 outputs (2 x 0-30 V / 0-5 A and 1 x 5 V / 3 A), resolution ≤1 mV / 1 mA, OVP/OCP, USB/LAN, SCPI.10 Nos
4High-Power Programmable DC Power Supply0-60 V, ≥10 A, ≥600 W, remote sense, SCPI, USB/LAN.1 No
5Benchtop Digital Multimeter6½ digit, DC accuracy ≤0.015%, SCPI, USB/LAN, data logging.2 Nos
6Handheld Digital MultimeterTrue-RMS, ≥6000 counts, auto-ranging, AC/DC V and A, capacitance, frequency, temperature, continuity, CAT III 600 V.15 Nos
7Arbitrary Function Generator2 channels, ≥30 MHz sine, arbitrary waveform, modulation, sweep, burst, built-in frequency counter.3 Nos
8USB Logic Analyser≥16 channels, ≥100 MS/s, decoders for I2C, SPI, UART, CAN, 1-Wire; software licence included.5 Nos
9Benchtop LCR Meter100 Hz - 100 kHz, basic accuracy ≤0.1%, 4-terminal Kelvin clips included.1 No
10Thermal Imaging Camera≥256 x 192 IR resolution, radiometric, -20 to 400 °C, thermal sensitivity ≤50 mK.1 No
11Stereo Trinocular Microscope with Camera7x-45x continuous zoom, trinocular, full-HD USB/HDMI camera, LED ring light, boom stand.3 Nos
12AC/DC Clamp MeterTrue-RMS, ≥400 A AC/DC, CAT III 600 V, inrush current, temperature.4 Nos
13Programmer / Debugger SetST-LINK V3, SEGGER J-Link EDU Mini (or equivalent), USBasp/AVR ISP, USB-UART bridges (CP2102/FT232).5 sets (1 each)
B. Soldering, Rework and AssemblyB. Soldering, Rework and AssemblyB. Soldering, Rework and AssemblyB. Soldering, Rework and Assembly
14ESD-Safe Digital Soldering StationDigital, ≥80 W, 150-450 °C, ±2 °C stability, ESD-safe, stand and three tips; Weller / Hakko class.10 Nos
15Hot-Air SMD Rework Station600-1000 W, 100-500 °C, digital, ESD-safe, assorted nozzle set.4 Nos
16Vacuum Desoldering Station≥90 W, ESD-safe, with tips and filter spares.2 Nos
17Benchtop Solder Fume ExtractorActivated carbon + HEPA filter, ≥100 m³/h, flexible arm, low noise.5 Nos
18PCB PreheaterBottom IR/ceramic preheater, ≥300 x 200 mm, adjustable to 200 °C.1 No
19Ultrasonic Cleaner≥6 L, heated, digital timer.1 No
20ESD Precision Tool KitESD tweezers, flush cutters, precision screwdriver set, spudgers, wire strippers.10 sets
21Helping Hands with LED MagnifierAdjustable arms, ≥3x magnifier, LED light, weighted base.10 Nos
C. Compute, Microcontroller and IoT BoardsC. Compute, Microcontroller and IoT BoardsC. Compute, Microcontroller and IoT BoardsC. Compute, Microcontroller and IoT Boards
22Arduino UNO R4 WiFi (or equivalent)Original board with USB cable.10 Nos
23Arduino Mega 2560 Rev3 (or equivalent)Original board with USB cable.5 Nos
24ESP32-S3 Development BoardESP32-S3-DevKitC class, ≥8 MB flash, WiFi + BLE.20 Nos
25ESP32-CAM Module with ProgrammerOV2640 camera, WiFi + BLE, with USB programmer base.6 Nos
26STM32 Nucleo-64 BoardSTM32F446RE or equivalent, ST-LINK on board.10 Nos
27Raspberry Pi Pico W / Pico 2 WWith pre-soldered headers.10 Nos
28Raspberry Pi 5 Kit8 GB RAM, active cooler, official 27 W PSU, 64 GB A2 microSD, case.10 sets
29Raspberry Pi Camera Module 312 MP, autofocus, with ribbon cable.4 Nos
30NVIDIA Jetson Orin Developer Kit (Nano / NX class)8 GB or higher, with PSU. Newer module generation than the TX2 class is required; older TX2 boards are not acceptable.5 Nos
31LoRa Module SetSX1262/SX1276 modules for the 865-867 MHz Indian band, antenna included.10 Nos
324G LTE Modem ModuleSIM7600 class, India band support, with antenna and USB interface.4 Nos
33GNSS Moduleu-blox M10 class, active antenna, UART/I2C breakout.4 Nos
34Edge AI AcceleratorUSB or M.2 neural accelerator, Intel Movidius NCS2 class, Google Coral or Hailo-8 (newer equivalents accepted), with host cable and SDK examples.4 Nos
35IoT Sensor Master Kit≥50 modules including BME280, MPU6050/ICM-42688 IMU, VL53L1X ToF, HC-SR04 ultrasonic, IR obstacle and line-following sensors, MQ gas sensors, PIR, LDR, OLED, RC522 RFID, relay modules, rotary encoders, load cell + HX711, MAX30102 pulse/SpO2. Serves both IoT and robotics sensing.10 kits
36Motor Driver and Power Electronics KitL298N/TB6612, BTS7960 (43 A), TMC2209/DRV8825, MOSFET and relay modules, buck/boost converters.10 kits

Package 2: 3D Design and Printing

Installation location: Proto Lab (Lab 2) (specialty printers in Lab 3, see section C)

S. No.ItemMinimum SpecificationQty.
A. 3D PrintingA. 3D PrintingA. 3D PrintingA. 3D Printing
37FDM 3D Printer (Standard)Build volume ≥250 x 250 x 250 mm, direct-drive extruder, hotend ≥300 °C, heated bed ≥100 °C, auto bed levelling, filament run-out sensor, supports PLA/PETG/ABS/TPU.8 Nos
38FDM 3D Printer (Large Format)Build volume ≥400 x 400 x 400 mm, enclosed or enclosure-ready, hotend ≥300 °C, auto bed levelling. Reference class: Aeqon 400 V2 or equivalent.1 No
39Resin 3D Printer (MSLA)Build volume ≥218 x 123 x 250 mm, ≥8K mono LCD, XY resolution ≤30 µm.2 Nos
40Resin Wash and Cure StationCompatible with the quoted resin printers, heated wash, UV cure, timer.1 No
41Filament Dryer / Dry Cabinet50 L electronic dry cabinet with humidity display, plus four single-spool filament dryers.1 + 4 Nos
42Structured-Light 3D ScannerHandheld, accuracy ≤0.1 mm, scan speed ≥0.5 million points/s, colour texture, export STL/OBJ/PLY, software included.1 No
B. Design Workstations and SoftwareB. Design Workstations and SoftwareB. Design Workstations and SoftwareB. Design Workstations and Software
43CAD and Simulation WorkstationIntel Core i7 / Ryzen 7 or better, 32 GB RAM, 1 TB NVMe SSD, discrete GPU ≥12 GB VRAM (RTX 4070 class or better), 27" QHD monitor, keyboard, mouse; dual boot Windows 11 Pro and Ubuntu 22.04 with ROS 2 and Gazebo pre-installed. Also used for robotics simulation.10 Nos
44Parametric 3D CAD/CAE Software LicencesSolidWorks / Fusion / Inventor or equivalent, 1-year subscription, ≥10 seats, licence must permit commercial startup use.10 seats
45CAM Software LicencesCAM for the CNC router and milling machines (VCarve Pro / Fusion Manufacturing / Mastercam or equivalent), 1-year, commercial use permitted.2 seats
46Digital Vernier Calliper0-150 mm, 0.01 mm resolution, stainless steel.10 Nos
47Digital Micrometer0-25 mm, 0.001 mm resolution, calibration certificate.2 Nos
C. Specialty 3D Printing and Display (AIC priority list; installation in Fabrication Lab, Lab 3)C. Specialty 3D Printing and Display (AIC priority list; installation in Fabrication Lab, Lab 3)C. Specialty 3D Printing and Display (AIC priority list; installation in Fabrication Lab, Lab 3)C. Specialty 3D Printing and Display (AIC priority list; installation in Fabrication Lab, Lab 3)
48Silicone / Rubber 3D PrinterPaste or liquid-silicone extrusion printer for silicone (Shore 10A-60A) and rubber-like materials, pneumatic dispensing with cartridges ≥30 ml, heated curing bed, build volume ≥200 x 200 x 150 mm, slicer software included.1 No
493D Bio PrinterExtrusion bioprinter for hydrogels and bioinks (non-clinical research and teaching use), ≥2 printheads, temperature-controlled printhead and bed (4-60 °C), build area ≥100 x 100 mm, UV or blue-light crosslinking, HEPA or enclosed chamber, sterile cartridges, software included.1 No
503D MonitorAutostereoscopic or active/passive-glasses 3D display, ≥27", 4K, for viewing CAD models and scans in 3D, with graphics-card compatibility list and glasses where needed.1 No

Package 3: Drone, Robotics, Health-Tech and Agri-Tech

Installation location: Proto Lab (Lab 2)

S. No.ItemMinimum SpecificationQty.
A. Drone / UAVA. Drone / UAVA. Drone / UAVA. Drone / UAV
51Flight Controller KitPixhawk 6C/6X class, PX4/ArduPilot compatible, GPS, power module, buzzer and safety switch.5 sets
52Quadcopter Frame Kit (450 mm class)Glass fibre / carbon, with landing gear and power distribution board.5 Nos
53Hexacopter Frame Kit (650-800 mm)Carbon fibre, foldable arms, payload mount.1 No
54Propulsion Set4 BLDC motors, 4 ESCs (≥30 A), 4 propellers (9-10") per set.6 sets
55Thrust and Motor Test Stand≥10 kg thrust, torque measurement, logs voltage, current, RPM, temperature and efficiency, USB software.1 No
56LiPo Battery Pack Assortment3S/4S/6S, 2200-10000 mAh, XT60/XT90, branded.12 Nos
57LiPo Balance Charger≥300 W dual-channel, 1-6S, with 24 V PSU.3 Nos
58LiPo Safe Bag and Charging BoxFire-retardant bags (15) and one fireproof charging box (2).15 + 2 Nos
59RC Transmitter with Receivers2.4 GHz ELRS, ≥8 channels, with 2 receivers each.3 sets
60Telemetry Radio Pair865-867 MHz licence-exempt Indian band, ≥1 km range, MAVLink compatible.4 pairs
613-Axis Gimbal with Camera4K camera, gimbal controller, damped mount.1 No
62Rangefinder / Optical Flow ModuleTFmini / Matek class, for ArduPilot/PX4.4 Nos
63Indoor Drone Flight Cage≥5 x 5 x 3 m, HDPE/nylon impact net on steel or aluminium frame, door, floor padding, anchored to floor.1 No
B. RoboticsB. RoboticsB. RoboticsB. Robotics
646-DOF Desktop Robotic ArmPayload ≥1 kg, repeatability ≤±0.1 mm, ROS/ROS 2 support, controller and software.3 Nos
65Industrial 6-Axis Robotic Arm (Collaborative)Payload ≥3 kg, reach ≥500 mm, repeatability ≤±0.05 mm, collision detection, teach pendant, ROS 2 driver, safety controller, mounting table; UR3e / Dobot CR class.1 No
66Gripper and End-Effector SetElectric parallel gripper, vacuum gripper and soft gripper compatible with the quoted arms, with mounting adaptors.3 sets
67Educational Robotics KitMindstorms-class programmable kit (e.g., LEGO Education SPIKE Prime or equivalent): hub, motors, colour/distance/force sensors, block and Python programming, storage tray.10 kits
68Differential-Drive Mobile Robot PlatformROS 2 compatible, wheel encoders, IMU, ≥5 kg payload, ≥2 h runtime, mounts for LiDAR and depth camera.5 Nos
692D LiDAR360°, ≥12 m range, ≥8 kHz sample rate (RPLIDAR class).4 Nos
70Depth Camera / 3D Scanning SensorIntel RealSense D435i, Orbbec Femto Bolt (Kinect-class) or Luxonis OAK-D or equivalent, with SDK and 3D-scanning software.4 Nos
71Smart Serial Bus Servos≥20 kg·cm stall torque, feedback, daisy-chain, with controller board.10 Nos
72Hobby Servo AssortmentMG996R / DS3218 class.20 Nos
73Stepper Motor and Driver KitNEMA 17/23, TMC2209/DM542 drivers, cables.10 sets
74DC Gear Motor with Encoder12/24 V, ≥100 rpm, Hall encoder.10 Nos
754WD Robot Chassis KitAluminium chassis, motors, wheels, mounting plates.6 Nos
C. Health-TechC. Health-TechC. Health-TechC. Health-Tech
76Biosignal Acquisition PlatformECG, EMG, EEG and EDA channels (ADS1298/AD8232/BITalino/OpenBCI class), USB/BLE, open SDK.3 sets
77Reference Fingertip Pulse OximeterCE/ISO-certified, for validation use.3 Nos
78IR Thermometer and Digital BP MonitorCE/ISO-certified reference devices.2 each
79ECG SimulatorAdjustable rate and rhythm, ≥12 lead output, for non-clinical testing.1 No
D. Agri-TechD. Agri-TechD. Agri-TechD. Agri-Tech
80Soil Sensor SetCapacitive moisture, EC, pH, NPK (RS485 Modbus) with probes.6 sets
81Weather Station Sensor SetWind speed and direction, rain gauge, temperature, humidity, pressure; RS485/analog.1 set
82Outdoor LoRa Gateway8-channel, 865-867 MHz, Ethernet/4G, IP65.1 No
83Solar Power Kit100 W panel, MPPT controller, 12 V 20 Ah LFP battery.2 sets
84Irrigation Test Bed12 V submersible pumps (4), 12 V solenoid valves (6), flow meters (4), drip kit, 100 L tank.1 set

Package 4: Fabrication Lab and Pilot-Batch Production

Installation location: Fabrication Lab (Lab 3)

S. No.ItemMinimum SpecificationQty.
A. Digital FabricationA. Digital FabricationA. Digital FabricationA. Digital Fabrication
85CO2 Laser Cutter (Large Format)100-130 W sealed CO2 tube, bed ≥1300 x 900 mm, honeycomb + knife table, autofocus, air assist, water chiller, exhaust blower with ducting, cuts ≥20 mm acrylic.1 No
86Desktop CO2 Laser EngraverWork area ≥600 x 300 mm, 40-60 W sealed CO2 tube, pass-through slot, autofocus, air assist, fume extraction, USB/Ethernet; Trotec Speedy 100 class. For fine engraving, small parts and student sessions.1 No
87Fiber Laser Marking Machine≥50 W, field ≥110 x 110 mm, rotary attachment, fume extractor, supports metals and plastics.1 No
883-Axis CNC RouterBed ≥1220 x 2440 mm (full 8 x 4 ft sheet) [or 1300 x 900 mm if floor space is limited], Z travel ≥200 mm, 3-4.5 kW water-cooled spindle with VFD, vacuum table with pump, dust shoe, tool-length sensor; for wood, MDF, acrylic, ACP and light aluminium work. ShopBot class.1 No
89Benchtop CNC Milling Machine3-axis, travel ≥400 x 250 x 200 mm, ≥1.5 kW spindle, rigid steel frame, safety enclosure, for aluminium and plastics.1 No
90Desktop Precision Milling Machine (Wax / Mould / PCB)Desktop 3-axis, work area ≥200 x 150 x 60 mm, spindle 6,500-15,000 rpm, step ≤0.01 mm; mills machinable wax, foam, plastics and FR4 (isolation milling, drilling, outline routing), with end-mill set, dust cover and software; Roland MDX-20 class.2 Nos
91Vinyl Cutter (24 in)Media width ≥610 mm, cutting force up to 200 gf, speed ≥500 mm/s, contour cutting with registration marks, stand and blades; also cuts copper foil for flexible circuits; Roland GX/RX-24 class.1 No
92Bench Metal Lathe≥300 mm between centres, variable speed, with chuck, tool post and basic tool set.1 No
93Programmable Burnout Furnace / KilnProgrammable electric furnace, ≥1100 °C, chamber ≥200 x 200 x 200 mm, multi-segment controller, over-temperature cut-off, fume vent; for lost-wax casting, ceramics, glass and heat treatment; Neycraft Vulcan A-550 class.1 No
B. Woodworking and Metalworking MachinesB. Woodworking and Metalworking MachinesB. Woodworking and Metalworking MachinesB. Woodworking and Metalworking Machines
94Table Saw10" blade, ≥1800 W, riving knife, blade guard, rip fence, mitre gauge.1 No
95Benchtop Band Saw (Wood)10" class benchtop, throat ≥250 mm, ≥370 W, fence, mitre gauge, spare blades; Jet 10 class.1 No
96Sliding Mitre Saw12", ≥1800 W, laser guide, dust bag.1 No
97Drill Press16 mm chuck, ≥12 speeds, ≥750 W, with machine vice.2 Nos
98Scroll Saw20" (≥500 mm) throat, variable speed 400-1750 SPM, cutting depth ≥50 mm, bevel tilt, blower and work light, blades included; DeWalt DW788 class.1 No
99Belt and Disc Sander≥375 W, bench-mounted, 150 mm disc.1 No
100Horizontal Metal Cutting Band Saw≥5" capacity, coolant, swivel vice.1 No
101Inverter MIG/MMA Welding Machine≥200 A, 3-phase 415 V, with torch, earth clamp, regulator and starter consumables.1 No
102Sheet Metal Bending Brake with Hand Shear1000 mm, 1.5 mm mild steel capacity.1 set
103Bench Grinder8", ≥500 W, with spark guards and eye shields.1 No
104Angle Grinder4", ≥900 W, with guard and discs.4 Nos
105Silent Air Compressor2 HP, oil-free, ≥100 L tank, 8 bar, with hose and basic pneumatic tool kit.1 No
106Industrial Dust Collector≥2 HP, ≥1200 m³/h, 2-stage cyclone, ducting and blast gates for saws, sander and CNC.1 set
107Wet/Dry Shop Vacuum≥2000 W, ≥30 L.2 Nos
C. Portable Power Tools and Hand ToolsC. Portable Power Tools and Hand ToolsC. Portable Power Tools and Hand ToolsC. Portable Power Tools and Hand Tools
108Cordless Drill-Driver18 V, 2 batteries, charger, 13 mm chuck, bit set.10 Nos
109Cordless Impact Driver18 V, 2 batteries, charger.2 Nos
110Corded Jigsaw≥700 W, orbital action, blade set.2 Nos
111Hand Router with Bit Set≥1200 W, variable speed, 12-piece bit set.2 Nos
112Random Orbital Sander≥300 W, dust bag.2 Nos
113Heat Gun≥2000 W, two temperature settings.3 Nos
114Rotary Tool Kit≥130 W, variable speed, 100+ accessories.2 Nos
115Rivet Gun and Rivet-Nut Tool KitHand riveter plus rivet-nut tool, M3-M8 mandrels.2 sets
116Master Hand Tool KitSpanners 6-32 mm, hex keys (metric + imperial), ≥120-piece socket set, torque wrench, pliers set, screwdriver set, hammers, hacksaw, files.6 sets
117Tap and Die SetM3 to M12, in case.2 sets
118Bench Vice125 mm jaw, swivel base.4 Nos
119Clamp AssortmentF-clamps, C-clamps, bar clamps and ratchet clamps, ≥40 pieces in total.1 set
120Measurement and Layout SetDigital calliper 300 mm, steel rules, try square, digital spirit level, tape measures, scriber, centre punch.5 sets
121Precision Weighing Scale6 kg x 0.1 g and 30 kg x 1 g platform scale.1 each
D. Pilot-Batch Electronics Production (50-100 units)D. Pilot-Batch Electronics Production (50-100 units)D. Pilot-Batch Electronics Production (50-100 units)D. Pilot-Batch Electronics Production (50-100 units)
122Semi-Automatic Stencil PrinterPCB up to ≥350 x 300 mm, precision alignment table, stencil frame or frameless, squeegee set.1 No
123Tabletop Pick-and-Place MachineVision-assisted, ≥2 heads, ≥40 feeder slots, 0402 to QFP/QFN/BGA, ≥2500 CPH, PCB size ≥300 x 300 mm, software included.1 No
124Reflow OvenForced-convection, programmable multi-stage profiles, lead-free capable (≥260 °C), PCB area ≥300 x 300 mm, USB profile logging.1 No
125Solder Paste Refrigerator2-10 °C, ≥50 L, digital display.1 No
126Dry Cabinet for MSD Components≥320 L, ≤5% RH, electronic display.1 No
127Conformal Coating StationSpray booth or hood with extraction, plus UV inspection lamp.1 No
128Lab Drying / Curing Oven≥50 L, up to 250 °C, forced convection, digital controller.1 No
129Automatic Wire Cutting and Stripping Machine0.5-6 mm² wire, programmable length and strip length.1 No
130Ratchet Crimping Tool KitDupont, JST, Molex, XT60/XT90, Anderson, ferrules and lugs.2 sets
131Hydraulic Crimping Tool6-120 mm² lugs, with dies.1 No
132Heat Shrink GunVariable temperature, ≥1800 W.2 Nos
133Thermal Transfer Label Printer4", ≥300 dpi, USB/LAN, QR/barcode support.1 No
134Barcode / QR Scanner2D, USB, handheld.2 Nos
135Impulse Heat Sealer and Packing StationImpulse sealer ≥400 mm, shrink wrap and packing table.1 set
E. Sustainable Product Lab (Greentown): Heating and PressingE. Sustainable Product Lab (Greentown): Heating and PressingE. Sustainable Product Lab (Greentown): Heating and PressingE. Sustainable Product Lab (Greentown): Heating and Pressing
136Ceramic Band Heater230 V, 250-400 W, ≥300 °C, inner diameter [__ mm to suit barrel; bidder to propose 40-60 mm], with terminals and clamp.5 Nos
137Cartridge HeaterØ10-12 mm, 100-200 W, 230 V, stainless steel sheath, length ≥50 mm, max 400 °C, thermocouple pocket.5 Nos
138PID Temperature ControllerDigital, 48 x 48 mm, universal input (K-type / PT100), SSR output, auto-tune, 230 V, supplied with 25 A SSR and heat sink and K-type thermocouple.5 Nos
139Hydraulic Press[≥10 tonne; confirm], heated platens ≥250 x 250 mm up to 250 °C, digital temperature control, pressure gauge, safety guard, for compression moulding of recycled plastics.2 Nos

Package 5: EV and BMS Lab

Installation location: EV and BMS Lab (Lab 1)

S. No.ItemMinimum SpecificationQty.
A. Battery Test and CharacterisationA. Battery Test and CharacterisationA. Battery Test and CharacterisationA. Battery Test and Characterisation
140Cell-Level Battery Tester / Cycler≥8 independent channels, 0-5 V, ≥10 A per channel, CC/CV charge, CC/CP/pulse discharge, accuracy ±0.05%, temperature inputs, report software (capacity, DCIR); supports 18650/21700/pouch.1 No
141Pack-Level Battery Tester / CyclerUp to 100 V, ≥30 A, 2 channels, charge/discharge, CAN/Ethernet, data logging, safety interlocks; energy-regenerative preferred.1 No
142Programmable DC Electronic Load0-150 V, ≥40 A, ≥1 kW, CC/CV/CR/CP, transient and battery-discharge modes, SCPI.1 No
143High-Power Programmable DC Power Supply0-100 V, ≥15 A, ≥1.5 kW, CAN/Ethernet/USB, SCPI.1 No
144Battery Impedance / OCV Tester4-wire, 1 kHz AC, 0-100 V, accuracy ≤0.5%, with probes.2 Nos
145Cell Capacity Grader and Sorter16 channels, 18650/21700, automatic sorting reports.1 No
146Battery Pack Spot WelderPulse type, ≥3.6 kW, welds 0.1-0.3 mm nickel strip for 18650/21700.1 No
147Cell Demonstrator and Battery Pack Assembly KitTraining kit showing cell to module to pack build: cell holders, busbars, nickel strip, fish paper, sample BMS, enclosure, insulated tools and assembly guide; cells supplied separately (Package 7); compatible with the spot welder.1 kit
148Temperature Chamber≥100 L, -20 to +80 °C, programmable profiles, with cable port.1 No
B. BMS Development and TestB. BMS Development and TestB. BMS Development and TestB. BMS Development and Test
149BMS Test Bench / Cell Simulator≥16 channels, 0-5 V ±1 mV, ≥100 mA per channel, NTC temperature simulation, fault injection, isolated, USB/LAN control.1 No
150BMS Development KitsEvaluation boards from three different AFE families (e.g., TI BQ76952, ADI LTC6811/ADBMS, NXP MC33771, or equivalent), 4S-16S.6 sets
151BMS Training Rig with 2 kWh Battery PackTraining rig with ≈2 kWh pack (≥48 V LFP/NMC), 13S-16S smart BMS with display, contactors, pre-charge, current shunt, fault-injection panel, CAN/UART interface, programmable load port, transparent safety enclosure and experiment manual.1 No
152Training Battery Packs with Smart BMSLFP 12.8 V 20 Ah, transparent enclosure, UART/CAN BMS, datasheets and test reports.4 Nos
C. Motor and PowertrainC. Motor and PowertrainC. Motor and PowertrainC. Motor and Powertrain
153Power Analyser4 channels, up to 1000 V, bandwidth DC-1 MHz, accuracy ≤0.1%, motor evaluation inputs (torque, speed).1 No
154Isolated Oscilloscope with HV Probes4 isolated channels, ≥200 MHz, 2 high-voltage differential probes (≥1 kV), 2 AC/DC current probes.1 set
155Induction Motor Characterisation Rig3-phase induction motor ≥1.5 kW with VFD, load machine or brake, torque-speed sensor ±0.2%, measures V/I/P/PF/efficiency, speed-torque and V/f curves, data acquisition software and experiment manual. Bidder may offer one modular dynamometer bench supporting all three motor rigs, provided all three configurations are supplied.1 No
156BLDC Motor Characterisation RigBLDC/PMSM motor ≥1 kW with controller, load brake, torque-speed sensor ±0.2%, back-EMF, Kt/Ke and efficiency tests, data acquisition software and experiment manual.1 No
157Motor-Generator Performance Mapping RigFour-quadrant coupled motor/generator set, ≥3 kW, ≥6000 rpm, ≥10 Nm, automatic torque-speed grid sweep with efficiency maps, regeneration test, DC bus monitoring.1 No
158EV Bench-Level SimulatorBench-top EV emulator with integrated motor, controller, battery/DC-bus and load emulation; runs standard drive cycles (IDC/WLTP) and shows speed, torque, SoC, range and regenerative energy; data logging.1 No
159EV Vehicle Algorithm Developer PlatformRapid control prototyping platform for vehicle control unit, motor control (FOC), BMS SoC estimation and regenerative braking; MATLAB/Simulink-compatible, CAN, PWM/ADC I/O, four FOC controller boards (48 V, ≥60 A peak, open firmware), courseware.1 platform
160CAN / CAN-FD Analyser InterfaceUSB, 2 channels, CAN-FD, J1939/OBD-II/UDS software support (Kvaser, PEAK, Vector or equivalent).4 Nos
161Two-Wheeler EV Conversion Kit (Vehicle Not Included)Conversion kit for an ICE two-wheeler: 48-60 V BLDC hub/mid motor ≥1.5 kW, controller, throttle, ≥2 kWh LFP/NMC battery with BMS, DC-DC converter, display, harness, regenerative braking, mounting brackets, instrumented measurement points for teaching. The vehicle will be provided by the purchaser.1 kit
D. Demonstrators and Electrical Safety InstrumentsD. Demonstrators and Electrical Safety InstrumentsD. Demonstrators and Electrical Safety InstrumentsD. Demonstrators and Electrical Safety Instruments
162EV Charging SystemTraining-grade charging system: programmable 48-72 V, ≥10 A charger with CAN control and session data logging, with supply-equipment interface as per applicable Indian standards (IS 17017 series / LECCS for light EVs); for use with the conversion kit and training packs.2 Nos
163Insulation Resistance TesterUp to 5 kV, PI and DAR measurement, ≥1 TΩ.1 No
164Earth Resistance Tester3/4-pole, digital.1 No
165DC Clamp MeterTrue-RMS, ≥1000 A DC/AC.4 Nos
166Infrared Thermometer-50 to 550 °C, laser pointer.4 Nos
E. Battery Safety and High-Voltage PPEE. Battery Safety and High-Voltage PPEE. Battery Safety and High-Voltage PPEE. Battery Safety and High-Voltage PPE
167Fire-Resistant Battery Charging and Storage Cabinet≥90 min fire resistance (EN 14470-1 Type 90 or equivalent), ventilated, lockable, ≥2 shelves, internal power sockets.2 Nos
168Lithium-Ion Fire ExtinguisherSuitable for Li-ion fires (aqueous vermiculite / water-mist type or equivalent), ≥6 L.4 Nos
169Fire Blanket for Battery FiresLarge, ≥2 m x 3 m, high-temperature rated, with storage case.2 Nos
170Class 0 (1000 V) Insulating GlovesWith leather protector gloves, size assortment, tested to IEC 60903 or equivalent.6 pairs
1711000 V Insulated Tool KitVDE/IEC 60900 certified.3 sets
172Insulating Rubber Mat1 m x 5 m roll, rated ≥1000 V.3 Nos
173Arc-Rated Face ShieldWith head gear and carry case.4 Nos
174Lockout-Tagout (LOTO) KitPadlocks, hasps, tags, breaker lockouts.3 kits

Package 6: Furniture, Networking and Safety (All Labs)

Installation location: All three labs

S. No.ItemMinimum SpecificationQty.
A. Furniture and StorageA. Furniture and StorageA. Furniture and StorageA. Furniture and Storage
175ESD-Safe Electronics Workbench1500 x 750 mm, ESD laminate top (10⁶-10⁹ Ω), overhead shelf, 6 sockets, earthing point, ≥300 kg load, drawer.10 Nos
176Heavy-Duty Fabrication Workbench1800 x 800 x 850 mm, hardwood or 3 mm steel top, ≥500 kg load, vice-mount ready.4 Nos
177ESD Assembly Line Table2400 x 750 mm, ESD top, shelf, power strip.4 Nos
178ESD Small-Parts Drawer Cabinet60 drawers, anti-static.10 Nos
179Team Lockers for StartupsSteel, lockable, 2 compartments each.12 Nos
180Heavy-Duty Steel Racks6 ft, 5 shelves, ≥150 kg per shelf.8 Nos
181Tool Wall / Shadow BoardsPerforated steel panels with hooks.6 Nos
182ESD Chairs and StoolsConductive, adjustable height.30 Nos
183Tool Trolley with DrawersSteel, ≥5 drawers, lockable, castors.4 Nos
184Plastic Storage Bins with RailsAssorted sizes with metal brackets.200 Nos
185Flammable Storage Cabinet45 L, ≥30 min fire rating, ventilated.2 Nos
186Glass / Whiteboards1200 x 900 mm, wall-mounted.3 Nos
B. Power Back-Up, Networking and AccessB. Power Back-Up, Networking and AccessB. Power Back-Up, Networking and AccessB. Power Back-Up, Networking and Access
187Online UPS10 kVA, double conversion, ≥15 min backup, for Proto Lab critical circuits; final sizing after load calculation.1 No
188Managed PoE+ Network Switch24 port, VLAN support.1 No
189Wi-Fi 6 Access PointCeiling mount, PoE, managed.3 Nos
190CCTV System12 x 4 MP cameras, 16-channel NVR, ≥8 TB storage, 30-day retention.1 set
191RFID / Biometric Access ControlDoor controller with logs, for 3 doors.3 Nos
192Interactive Display75", 4K, touch, with mobile stand, for training and FDP sessions.2 Nos
C. Fire, First Aid and Personal Protective EquipmentC. Fire, First Aid and Personal Protective EquipmentC. Fire, First Aid and Personal Protective EquipmentC. Fire, First Aid and Personal Protective Equipment
193Smoke and Heat Detection SystemConventional panel with 3 zones, detectors and sounders covering all three labs.1 set
194ABC Dry Powder Fire Extinguisher4 kg, ISI marked.8 Nos
195CO2 Fire Extinguisher4.5 kg, ISI marked.4 Nos
196Class D Fire ExtinguisherFor metal fines (aluminium, magnesium), ≥5 kg.2 Nos
197Industrial First Aid KitWall-mounted, burn dressings, eyewash, tourniquet.3 Nos
198Eyewash StationPortable or wall-mounted, ≥16 L.2 Nos
199Safety GogglesAnti-fog, ANSI Z87.1 or IS 5983 equivalent.40 Nos
200Laser Safety GlassesOD 6+ at 10.6 µm (CO2) and 1064 nm (fiber).4 each
201Auto-Darkening Welding Helmet with Gloves and ApronShade 9-13, leather gloves and apron.2 sets
202Hearing ProtectionEar muffs, ≥25 dB NRR.30 Nos
203RespiratorsHalf-mask with P100 and organic vapour cartridges (6) plus FFP2 masks (100).6 + 100 Nos
204Cut-Resistant GlovesLevel 5, assorted sizes.30 pairs
205ESD Smocks and Wrist StrapsSmocks (30) and wrist straps with cords (40).30 + 40 Nos
206HEPA Air PurifierFor resin printing and dust areas, CADR ≥500 m³/h.2 Nos
207Dehumidifier≥20 L/day, for component storage rooms.2 Nos
208Safety Signage SetLab rules, PPE, hazard, exit and emergency signage for all three labs.1 set

Package 7: Starter Consumables and Component Stock (3 months)

Installation location: All three labs

S. No.ItemMinimum SpecificationQty.
A. 3D Printing and Fabrication MaterialsA. 3D Printing and Fabrication MaterialsA. 3D Printing and Fabrication MaterialsA. 3D Printing and Fabrication Materials
209PLA Filament1.75 mm, 1 kg spools, assorted colours, ±0.03 mm tolerance.60 spools
210PETG Filament1.75 mm, 1 kg spools.30 spools
211ABS / ASA Filament1.75 mm, 1 kg spools.15 spools
212TPU Filament1.75 mm, 95A, 0.5 kg spools.10 spools
213Standard Photopolymer Resin1 kg bottles, 405 nm, compatible with quoted printers.10 bottles
214Isopropyl Alcohol (IPA)≥99%, 5 L can.4 cans
215Acrylic Sheets3 mm and 5 mm, 8 ft x 4 ft, assorted colours.4 sheets each
216BWP Plywood and MDF6, 12 and 18 mm, 8 ft x 4 ft.4 sheets each
217Sheet Metal and Aluminium ExtrusionMS 1-2 mm and SS 304 1 mm sheets (1.2 x 2.4 m, 2 each); aluminium sheet 1 and 2 mm; 2020 and 3030 T-slot profile, 3 m lengths, with fastener kits.Assorted
218Machinable Wax BlocksModelling/milling wax, assorted sizes up to 100 x 100 x 50 mm.20 blocks
219Adhesive Vinyl Rolls and Copper FoilVinyl rolls 610 mm x 5 m, assorted colours (6); copper foil with conductive adhesive, 5 m (4).6 + 4 rolls
220Milling End Mill and Engraving Bit SetCarbide flat and ball end mills 1/64" to 1/8", V-bits for PCB isolation; for the desktop milling machines and CNC router.2 sets
221Silicone Cartridges and Bio-ink Starter KitAs recommended by the OEM of the silicone printer and bio printer: silicone cartridges (≥10) and hydrogel/bio-ink starter materials with sterile cartridges (≥20).1 lot
222OEM Starter Consumables PackFor every machine and instrument supplied: blades, nozzles, tips, bits, filters, lubricants and cleaning supplies for ≥3 months of use, as recommended by the OEM; itemised in the commercial bid.1 set per machine
223Fastener and Insert KitsMetric M2-M8 screws, nuts, washers, heat-set inserts, rivets.6 kits
224Paint, Primer and ThinnerPU paint and primer, 1 L, plus 20 L thinner.5 + 5 + 1
B. Electronics Consumables and ComponentsB. Electronics Consumables and ComponentsB. Electronics Consumables and ComponentsB. Electronics Consumables and Components
225Solder WireSAC305 lead-free, 0.8 mm, 500 g spool, with flux core.10 spools
226Solder PasteType 4, lead-free, 500 g jar with syringes.4 jars
227Flux and Desoldering BraidNo-clean flux pen/gel plus desoldering braid.10 + 20 Nos
228Breadboards and Jumper Wires830-point breadboards, M-M, M-F and F-F jumper sets.30 + 30 sets
229Hook-Up Wire AssortmentSilicone wire 30-16 AWG, assorted colours, 10 m spools.1 set
230SMD Resistor and Capacitor Kits0402/0603/0805, E24, ≥1% tolerance.2 each
231Through-Hole Component KitsResistors, capacitors, diodes, transistors, LEDs, ICs.3 sets
232Connector AssortmentJST-XH, Dupont, XT60/XT90, Anderson, terminal blocks.1 set
233Copper Clad BoardsSingle- and double-sided FR4, 1.6 mm, 100 x 150 mm and larger.50 pcs
234Kapton Tape and Heat Shrink AssortmentKapton 10-50 mm, heat shrink 2-25 mm.1 set
C. Battery and EV MaterialsC. Battery and EV MaterialsC. Battery and EV MaterialsC. Battery and EV Materials
235Li-Ion CellsBranded 18650/21700, 2500-5000 mAh, with datasheets.200 Nos
236LiFePO4 Prismatic Cells3.2 V, 50-100 Ah, grade A, matched.16 Nos
237Nickel Strip0.15 mm, 8 mm wide, pure nickel.5 kg
238Nitrile GlovesBox of 100, assorted sizes.10 boxes

Package 8: AR/VR and Future Technology

Installation location: AR/VR Lab and Future Technology Lab (AIC plan; separate rooms from Labs 1 to 3)

S. No.ItemMinimum SpecificationQty.
A. AR/VR LabA. AR/VR LabA. AR/VR LabA. AR/VR Lab
239Standalone VR HeadsetMeta Quest 3/3S class: standalone 6DoF, ≥128 GB, colour passthrough, two controllers, hand tracking, ≥2 h battery, head strap and case; developer mode enabled.20 Nos
240VR Headset Charging and Storage CabinetLockable, ventilated, for 20 headsets with controllers, charging points and cable management.1 No
241PC-Tethered VR HeadsetHTC Vive Pro 2 / Dell Visor class: ≥2448 x 2448 per eye, ≥120 Hz, SteamVR-compatible tracking with two base stations and controllers.2 Nos
242AR/LiDAR TabletiPad Pro 11" or 12.9" with LiDAR scanner, ≥256 GB, Wi-Fi, Apple Pencil, protective case.3 Nos
243Android Tablet≥10", ≥8 GB RAM, ≥128 GB, ARCore-certified, with case, stylus and charger.5 Nos
244Premium Gaming LaptopIntel Core i9 / Ryzen 9, 32 GB DDR5, 1 TB NVMe, NVIDIA RTX 4070 8 GB class or better, 16" QHD ≥165 Hz, VR-ready ports, Windows 11.5 Nos
245VR Casting Smart TV55", 4K UHD, Google/Android TV, built-in Chromecast / Miracast / AirPlay, HDMI 2.1, wall mount.2 Nos
246XR Collaboration Platform LicenceLoop Metaverse (or equivalent) multi-user VR/AR classroom platform, 1-year, ≥30 concurrent users.1 licence
B. Future Technology LabB. Future Technology LabB. Future Technology LabB. Future Technology Lab
247Stereo Depth CameraZED 2i class: stereo depth to ≥20 m, built-in IMU, USB 3, SDK for ROS and Unity.1 No
248Optical See-Through AR GlassesEpson Moverio class: binocular see-through, ≥1920 x 1080 per eye, USB-C video input, camera, IMU, weight ≤150 g.2 Nos
249360-Degree CameraRicoh Theta Z1 class: dual 1-inch sensors, ≥4K video, ≥23 MP stills, RAW, Wi-Fi/USB.1 No
250Omnidirectional VR TreadmillVirtuix Omni class: harness, support ring, shoes/sensors, SDK, user weight up to 120 kg.1 No
251Hand-Tracking ControllerUltraleap Leap Motion Controller 2 class: ≥140° field of view, USB-C, Unity/Unreal SDK.2 Nos

Package 9: AI/ML Compute and Cybersecurity

Installation location: AI/ML Lab and Cybersecurity Lab (AIC plan; separate rooms from Labs 1 to 3)

S. No.ItemMinimum SpecificationQty.
A. AI/ML LabA. AI/ML LabA. AI/ML LabA. AI/ML Lab
252GPU Compute Server (4-GPU, 2U)Dual Intel Xeon Scalable 3rd gen or newer (≥52 cores total, Platinum 5320 class), Intel LGA 4189 board supporting 4 dual-width GPUs, 256 GB ECC DDR4 (16 DIMM slots, expandable to ≥2 TB), 2 TB NVMe + 500 GB SATA SSD, 8 hot-swap bays, 4 x NVIDIA RTX A6000 48 GB (or newer ≥48 GB GPUs), 1+1 redundant 1600 W 80 PLUS Platinum PSU, dual-port GbE + management LAN, BMC with KVM-over-IP, 2U rack, Ubuntu 22.04 LTS or later with AI/DL libraries, remote SSH access, 3-year on-site warranty, BIS/CE/FCC compliance.2 Nos
253Tableau Creator Licence1-year subscription, academic pricing where available.5 licences
254IBM Cognos Analytics with Watson Licence1-year subscription, academic pricing where available.1 licence
B. Cybersecurity LabB. Cybersecurity LabB. Cybersecurity LabB. Cybersecurity Lab
255Rack Server (Intel Xeon)2U, Intel Xeon Scalable (≥16 cores), 128 GB ECC RAM, 2 x 1.92 TB SSD (RAID 1), dual PSU, 4 x 1 GbE, BMC remote management, 3-year on-site warranty.2 Nos
256High-Performance WorkstationCurrent-generation Intel Core i9 or AMD Ryzen 9, 64 GB RAM, 1 TB NVMe SSD, 24" monitor, keyboard, mouse, Windows 11 Pro / Ubuntu dual boot, 3-year warranty.25 Nos
257Next-Generation Firewall with VPN and IDPS≥5 Gbps firewall throughput, ≥1 Gbps IPS throughput, IPsec/SSL VPN for ≥200 users, application control, web filtering, central logging, HA-ready, 3-year subscription. Covers firewall, VPN and IDPS in one appliance.1 No
258OSINT and NLP Software Stack InstallationInstallation and configuration of Scrapy, Beautiful Soup, NLTK, Gensim and Jupyter (open source) on the servers and workstations, with documentation and a hands-on handover.1 lot

5. Terms and Conditions

The following Terms and Conditions apply to all bidders participating in the tender for the supply, installation, and commissioning of equipment, tools, and machines for the establishment of an AIC Lab. All prospective vendors are required to read and comply with these terms in their entirety.

General Information

All equipment and materials must be delivered in the quantities and specifications as mentioned in the purchase order issued by the purchaser. The delivery location will be specified in the purchase order. The entire contract shall remain valid for a period of Two (2) months from the date of award.

Quotations submitted by bidders must remain valid for a minimum of 60 days from the final date of submission. Any quotation that does not meet this validity period will be considered non-compliant.

Bid Submission Guidelines

Bids may be submitted either via email (digitally signed) or in hard copy form, as specifically mentioned in the tender notice. All quotations must be printed on the bidder's official letterhead and duly signed by an authorized representative.

Each bid must be complete in all respects and must include the following mandatory documents:

Detailed Profile of the Bidder, highlighting experience and key competencies.

Copy of the Company/Firm Registration Certificate.

Copy of valid GST Registration Certificate.

Copy of submitted GST return (at least up to November 2024).

Copy of valid PAN Card.

Copies of Work Completion or Experience Certificates of similar completed works.

Valid Shop Establishment License or Factory License.

Genuine Manufacturer Authorization Form (MAF), which will be subject to verification with the respective OEM.

Bidder should provide an Escalation Matrix for training, service and after sales support.

Valid EPF, ESIC, and Professional Tax Registration Certificates (where applicable).

Self-Declaration/Affidavit (on ₹500/- Stamp Paper) regarding no blacklisting from IITs/NITs/Govt. Offices/PSUs/Autonomous Bodies.

Complete, signed, and stamped tender document including amendments and deviation sheets, if any (to be uploaded online only).

Declaration of agreed specifications on company letterhead, duly signed and stamped.

Any other documents in support of technical eligibility.

Technical Documentation and Compliance

The bidder must furnish complete technical documentation for each quoted item. This includes detailed product specifications, installation manuals, operation and maintenance manuals. The bidder is also required to submit a layout/design proposal aligned with the lab setup requirements, highlighting compliance points against the tender specifications.

Original technical brochures or scanned versions of product catalogs should be submitted with the bid. Wherever available, URLs to the OEM’s official product page should also be provided for cross- verification.

Each bidder must clearly mention the make, model, and complete technical specifications for the equipment being offered. A compliance sheet responding to each technical requirement outlined in the tender must be prepared and duly signed.

Eligibility and Qualification Criteria

All bidders must be OEMs or authorized partners/distributors or turnkey partners with valid authorization for th products they are quoting. Authorization letters must be submitted on the official letterhead.

Bidders must demonstrate relevant experience by submitting a minimum of three Purchase Orders (executed within the last five years) for similar equipment supplied to academic, R&D, or industrial institutions. A list of at least five institutional clients (with contact information) must be provided as a reference.

It is mandatory that the bidder or OEM has a registered support office in India to provide warranty and after-sales support. In the case of imported equipment, either the OEM or their authorized seller must submit a certificate confirming the presence of such a service support facility in India.

Financial Criteria

Prices quoted must be inclusive of all taxes (GST, customs, etc.), transportation, packaging, insurance, unloading, installation, commissioning, and training charges. There shall be no extra claim under any circumstances after the finalization of the bid.

The quoted prices must be firm and fixed throughout the duration of the contract. No escalation in price will be allowed under any pretext.

Evaluation and Award of Contract

All bids will be evaluated on the basis of compliance with the technical specifications, completeness of submitted documentation, financial eligibility, and price competitiveness. The contract shall be awarded to the bidder whose offer is determined to be technically responsive and lowest in cost.

The purchaser reserves the absolute right to reject any or all bids without assigning any reason. The final decision on selection will be at the sole discretion of the purchaser and shall be binding on all parties.

Warranty, Training and After-Sales Service

All equipment must carry a minimum onsite warranty of at least three years from the date of successful installation and commissioning. During this warranty period, the bidder shall repair or replace any defective items at no additional cost to the purchaser. All associated transportation, testing, and labor costs shall be borne by the bidder.

In case of any service delay or failure to resolve issues during the warranty period, the purchaser reserves the right to invoke penalties or reject future business from the vendor.

Payment Terms

Payment shall be released only after the successful supply, installation, and commissioning of the equipment. Final inspection and acceptance will be carried out by the purchaser’s technical committee.

No payment shall be made for equipment that is received in damaged condition, is non-functional, or fails to meet the required specifications. The bidder must submit all necessary documentation (delivery challans, installation report, warranty documents, training certificate, invoice, etc.) to process payment.

Other Conditions

No bidder shall be given preference based on category, class, or affiliation. The procurement may be extended to additional phases (e.g., Phase II) depending on availability of funds and institutional requirements.

Delayed delivery or installation may result in cancellation of order or imposition of penalties, as deemed fit by the purchaser. The scope of the supply and service must be entirely as per the BoQ and technical specifications.

21. Submission Deadline and Contact Details

21.1 All quotations must be submitted by 15-11-2026 by email to ceo.aic@gnits.ac.in or in a sealed cover, super-scribed "Tender for Hardware Labs", addressed to:

Dr. Sushmitha Sundar, Chief Executive Officer (CEO), AIC-GNITS Foundation

A305, Admin Block, 3rd Floor, #8-1-297/2/1, G. Narayanamma Institute of Technology and Science (for Women), Shaikpet, Hyderabad - 500 104, Telangana

21.2 Contact person: Dr. Sushmitha Sundar, CEO, AIC-GNITS Foundation. Email: ceo.aic@gnits.ac.in. Website: www.aic.gnits.ac.in.